i18nize some programs with gettext.
else
ALSAMIXER_DIR=
endif
-SUBDIRS= include alsactl alsaconf $(ALSAMIXER_DIR) amidi amixer aplay iecset seq speaker-test utils m4
+SUBDIRS= include alsactl alsaconf $(ALSAMIXER_DIR) amidi amixer aplay iecset seq speaker-test utils m4 po
EXTRA_DIST=ChangeLog INSTALL TODO README configure cvscompile depcomp
AUTOMAKE_OPTIONS=foreign
ACLOCAL_AMFLAGS = -I m4
INCLUDES = -I$(top_srcdir)/include
-LDADD = -lasound
+LDADD = -lasound $(LIBINTL)
# debug flags
#LDFLAGS = -static
#include <sys/time.h>
#include <sys/signal.h>
#include "aconfig.h"
+#include "gettext.h"
#include "formats.h"
#include "version.h"
void (*end) (int fd);
char *what;
} fmt_rec_table[] = {
- { NULL, end_raw, "raw data" },
- { begin_voc, end_voc, "VOC" },
- { begin_wave, end_wave, "WAVE" },
- { begin_au, end_au, "Sparc Audio" }
+ { NULL, end_raw, N_("raw data") },
+ { begin_voc, end_voc, N_("VOC") },
+ { begin_wave, end_wave, N_("WAVE") },
+ { begin_au, end_au, N_("Sparc Audio")}
};
#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 95)
{
snd_pcm_format_t k;
fprintf(stderr,
-"Usage: %s [OPTION]... [FILE]...\n"
+_("Usage: %s [OPTION]... [FILE]...\n"
"\n"
"-h, --help help\n"
" --version print current version\n"
" (relative to buffer size if <= 0)\n"
"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from xrun\n"
"-v, --verbose show PCM structure and setup (accumulative)\n"
-"-I, --separate-channels one file for each channel\n"
+"-I, --separate-channels one file for each channel\n")
, command);
- fprintf(stderr, "Recognized sample formats are:");
+ fprintf(stderr, _("Recognized sample formats are:"));
for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
const char *s = snd_pcm_format_name(k);
if (s)
fprintf(stderr, " %s", s);
}
- fprintf(stderr, "\nSome of these may not be available on selected hardware\n");
- fprintf(stderr, "The availabled format shortcuts are:\n");
- fprintf(stderr, "-f cd (16 bit little endian, 44100, stereo)\n");
- fprintf(stderr, "-f cdr (16 bit big endian, 44100, stereo)\n");
- fprintf(stderr, "-f dat (16 bit little endian, 48000, stereo)\n");
+ fprintf(stderr, _("\nSome of these may not be available on selected hardware\n"));
+ fprintf(stderr, _("The availabled format shortcuts are:\n"));
+ fprintf(stderr, _("-f cd (16 bit little endian, 44100, stereo)\n"));
+ fprintf(stderr, _("-f cdr (16 bit big endian, 44100, stereo)\n"));
+ fprintf(stderr, _("-f dat (16 bit little endian, 48000, stereo)\n"));
}
static void names_list(void)
err = snd_names_list("pcm", &list);
if (err < 0) {
- error("snd_names_list error: %s", snd_strerror(err));
+ error(_("snd_names_list error: %s"), snd_strerror(err));
return;
}
item = list;
card = -1;
if (snd_card_next(&card) < 0 || card < 0) {
- error("no soundcards found...");
+ error(_("no soundcards found..."));
return;
}
- fprintf(stderr, "**** List of %s Hardware Devices ****\n", snd_pcm_stream_name(stream));
+ fprintf(stderr, _("**** List of %s Hardware Devices ****\n"),
+ snd_pcm_stream_name(stream));
while (card >= 0) {
char name[32];
sprintf(name, "hw:%d", card);
error("control digital audio info (%i): %s", card, snd_strerror(err));
continue;
}
- fprintf(stderr, "card %i: %s [%s], device %i: %s [%s]\n",
+ fprintf(stderr, _("card %i: %s [%s], device %i: %s [%s]\n"),
card, snd_ctl_card_info_get_id(info), snd_ctl_card_info_get_name(info),
dev,
snd_pcm_info_get_id(pcminfo),
snd_pcm_info_get_name(pcminfo));
count = snd_pcm_info_get_subdevices_count(pcminfo);
- fprintf(stderr, " Subdevices: %i/%i\n", snd_pcm_info_get_subdevices_avail(pcminfo), count);
+ fprintf(stderr, _(" Subdevices: %i/%i\n"),
+ snd_pcm_info_get_subdevices_avail(pcminfo), count);
for (idx = 0; idx < (int)count; idx++) {
snd_pcm_info_set_subdevice(pcminfo, idx);
if ((err = snd_ctl_pcm_info(handle, pcminfo)) < 0) {
error("control digital audio playback info (%i): %s", card, snd_strerror(err));
} else {
- fprintf(stderr, " Subdevice #%i: %s\n", idx, snd_pcm_info_get_subdevice_name(pcminfo));
+ fprintf(stderr, _(" Subdevice #%i: %s\n"),
+ idx, snd_pcm_info_get_subdevice_name(pcminfo));
}
}
}
err = snd_config_search(snd_config, "pcm", &conf);
if (err < 0)
return;
- fprintf(stderr, "PCM list:\n");
+ fprintf(stderr, _("PCM list:\n"));
snd_config_save(conf, out);
snd_output_close(out);
}
static void signal_handler(int sig)
{
if (!quiet_mode)
- fprintf(stderr, "Aborted by signal %s...\n", strsignal(sig));
+ fprintf(stderr, _("Aborted by signal %s...\n"), strsignal(sig));
if (stream == SND_PCM_STREAM_CAPTURE) {
fmt_rec_table[file_type].end(fd);
stream = -1;
int do_names_list = 0, do_device_list = 0, do_pcm_list = 0;
snd_pcm_info_t *info;
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+
snd_pcm_info_alloca(&info);
err = snd_output_stdio_attach(&log, stderr, 0);
stream = SND_PCM_STREAM_PLAYBACK;
command = "aplay";
} else {
- error("command should be named either arecord or aplay");
+ error(_("command should be named either arecord or aplay"));
return 1;
}
else if (strcasecmp(optarg, "au") == 0 || strcasecmp(optarg, "sparc") == 0)
file_type = FORMAT_AU;
else {
- error("unrecognized file format %s", optarg);
+ error(_("unrecognized file format %s"), optarg);
return 1;
}
break;
case 'c':
rhwparams.channels = atoi(optarg);
if (rhwparams.channels < 1 || rhwparams.channels > 32) {
- error("value %i for channels is invalid", rhwparams.channels);
+ error(_("value %i for channels is invalid"), rhwparams.channels);
return 1;
}
break;
} else {
rhwparams.format = snd_pcm_format_value(optarg);
if (rhwparams.format == SND_PCM_FORMAT_UNKNOWN) {
- error("wrong extended format '%s'", optarg);
+ error(_("wrong extended format '%s'"), optarg);
exit(EXIT_FAILURE);
}
}
tmp *= 1000;
rhwparams.rate = tmp;
if (tmp < 2000 || tmp > 192000) {
- error("bad speed value %i", tmp);
+ error(_("bad speed value %i"), tmp);
return 1;
}
break;
file_type = FORMAT_WAVE;
break;
default:
- fprintf(stderr, "Try `%s --help' for more information.\n", command);
+ fprintf(stderr, _("Try `%s --help' for more information.\n"), command);
return 1;
}
}
err = snd_pcm_open(&handle, pcm_name, stream, open_mode);
if (err < 0) {
- error("audio open error: %s", snd_strerror(err));
+ error(_("audio open error: %s"), snd_strerror(err));
return 1;
}
if ((err = snd_pcm_info(handle, info)) < 0) {
- error("info error: %s", snd_strerror(err));
+ error(_("info error: %s"), snd_strerror(err));
return 1;
}
if (nonblock) {
err = snd_pcm_nonblock(handle, 1);
if (err < 0) {
- error("nonblock setting error: %s", snd_strerror(err));
+ error(_("nonblock setting error: %s"), snd_strerror(err));
return 1;
}
}
audiobuf = (char *)malloc(1024);
if (audiobuf == NULL) {
- error("not enough memory");
+ error(_("not enough memory"));
return 1;
}
if (*size >= reqsize)
return *size;
if ((size_t)safe_read(fd, buffer + *size, reqsize - *size) != reqsize - *size) {
- error("read error (called from line %i)", line);
+ error(_("read error (called from line %i)"), line);
exit(EXIT_FAILURE);
}
return *size = reqsize;
if (len > blimit) { \
blimit = len; \
if ((buffer = realloc(buffer, blimit)) == NULL) { \
- error("not enough memory"); \
+ error(_("not enough memory")); \
exit(EXIT_FAILURE); \
} \
}
}
if (len < sizeof(WaveFmtBody)) {
- error("unknown length of 'fmt ' chunk (read %u, should be %u at least)", len, (u_int)sizeof(WaveFmtBody));
+ error(_("unknown length of 'fmt ' chunk (read %u, should be %u at least)"),
+ len, (u_int)sizeof(WaveFmtBody));
exit(EXIT_FAILURE);
}
check_wavefile_space(buffer, len, blimit);
test_wavefile_read(fd, buffer, &size, len, __LINE__);
f = (WaveFmtBody*) buffer;
if (LE_SHORT(f->format) != WAV_PCM_CODE) {
- error("can't play not PCM-coded WAVE-files");
+ error(_("can't play not PCM-coded WAVE-files"));
exit(EXIT_FAILURE);
}
if (LE_SHORT(f->modus) < 1) {
- error("can't play WAVE-files with %d tracks", LE_SHORT(f->modus));
+ error(_("can't play WAVE-files with %d tracks"), LE_SHORT(f->modus));
exit(EXIT_FAILURE);
}
hwparams.channels = LE_SHORT(f->modus);
case 8:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_U8)
- fprintf(stderr, "Warning: format is changed to U8\n");
+ fprintf(stderr, _("Warning: format is changed to U8\n"));
hwparams.format = SND_PCM_FORMAT_U8;
break;
case 16:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_S16_LE)
- fprintf(stderr, "Warning: format is changed to S16_LE\n");
+ fprintf(stderr, _("Warning: format is changed to S16_LE\n"));
hwparams.format = SND_PCM_FORMAT_S16_LE;
break;
case 24:
case 3:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_S24_3LE)
- fprintf(stderr, "Warning: format is changed to S24_3LE\n");
+ fprintf(stderr, _("Warning: format is changed to S24_3LE\n"));
hwparams.format = SND_PCM_FORMAT_S24_3LE;
break;
case 4:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_S24_LE)
- fprintf(stderr, "Warning: format is changed to S24_LE\n");
+ fprintf(stderr, _("Warning: format is changed to S24_LE\n"));
hwparams.format = SND_PCM_FORMAT_S24_LE;
break;
default:
- error(" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)", LE_SHORT(f->bit_p_spl), LE_SHORT(f->byte_p_spl), hwparams.channels);
+ error(_(" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"),
+ LE_SHORT(f->bit_p_spl), LE_SHORT(f->byte_p_spl), hwparams.channels);
exit(EXIT_FAILURE);
}
break;
hwparams.format = SND_PCM_FORMAT_S32_LE;
break;
default:
- error(" can't play WAVE-files with sample %d bits wide", LE_SHORT(f->bit_p_spl));
+ error(_(" can't play WAVE-files with sample %d bits wide"),
+ LE_SHORT(f->bit_p_spl));
exit(EXIT_FAILURE);
}
hwparams.rate = LE_INT(f->sample_fq);
case AU_FMT_ULAW:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_MU_LAW)
- fprintf(stderr, "Warning: format is changed to MU_LAW\n");
+ fprintf(stderr, _("Warning: format is changed to MU_LAW\n"));
hwparams.format = SND_PCM_FORMAT_MU_LAW;
break;
case AU_FMT_LIN8:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_U8)
- fprintf(stderr, "Warning: format is changed to U8\n");
+ fprintf(stderr, _("Warning: format is changed to U8\n"));
hwparams.format = SND_PCM_FORMAT_U8;
break;
case AU_FMT_LIN16:
if (hwparams.format != DEFAULT_FORMAT &&
hwparams.format != SND_PCM_FORMAT_S16_BE)
- fprintf(stderr, "Warning: format is changed to S16_BE\n");
+ fprintf(stderr, _("Warning: format is changed to S16_BE\n"));
hwparams.format = SND_PCM_FORMAT_S16_BE;
break;
default:
if (hwparams.channels < 1 || hwparams.channels > 128)
return -1;
if ((size_t)safe_read(fd, buffer + sizeof(AuHeader), BE_INT(ap->hdr_size) - sizeof(AuHeader)) != BE_INT(ap->hdr_size) - sizeof(AuHeader)) {
- error("read error");
+ error(_("read error"));
exit(EXIT_FAILURE);
}
return 0;
snd_pcm_sw_params_alloca(&swparams);
err = snd_pcm_hw_params_any(handle, params);
if (err < 0) {
- error("Broken configuration for this PCM: no configurations available");
+ error(_("Broken configuration for this PCM: no configurations available"));
exit(EXIT_FAILURE);
}
if (mmap_flag) {
err = snd_pcm_hw_params_set_access(handle, params,
SND_PCM_ACCESS_RW_NONINTERLEAVED);
if (err < 0) {
- error("Access type not available");
+ error(_("Access type not available"));
exit(EXIT_FAILURE);
}
err = snd_pcm_hw_params_set_format(handle, params, hwparams.format);
if (err < 0) {
- error("Sample format non available");
+ error(_("Sample format non available"));
exit(EXIT_FAILURE);
}
err = snd_pcm_hw_params_set_channels(handle, params, hwparams.channels);
if (err < 0) {
- error("Channels count non available");
+ error(_("Channels count non available"));
exit(EXIT_FAILURE);
}
assert(err >= 0);
if ((float)rate * 1.05 < hwparams.rate || (float)rate * 0.95 > hwparams.rate) {
if (!quiet_mode) {
- fprintf(stderr, "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n", rate, hwparams.rate);
- fprintf(stderr, " please, try the plug plugin (-Dplug:%s)\n", snd_pcm_name(handle));
+ fprintf(stderr, _("Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"), rate, hwparams.rate);
+ fprintf(stderr, _(" please, try the plug plugin (-Dplug:%s)\n"), snd_pcm_name(handle));
}
}
rate = hwparams.rate;
assert(err >= 0);
err = snd_pcm_hw_params(handle, params);
if (err < 0) {
- error("Unable to install hw params:");
+ error(_("Unable to install hw params:"));
snd_pcm_hw_params_dump(params, log);
exit(EXIT_FAILURE);
}
snd_pcm_hw_params_get_period_size(params, &chunk_size, 0);
snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
if (chunk_size == buffer_size) {
- error("Can't use period equal to buffer size (%lu == %lu)", chunk_size, buffer_size);
+ error(_("Can't use period equal to buffer size (%lu == %lu)"),
+ chunk_size, buffer_size);
exit(EXIT_FAILURE);
}
snd_pcm_sw_params_current(handle, swparams);
err = snd_pcm_sw_params_get_xfer_align(swparams, &xfer_align);
if (err < 0) {
- error("Unable to obtain xfer align\n");
+ error(_("Unable to obtain xfer align\n"));
exit(EXIT_FAILURE);
}
if (sleep_min)
assert(err >= 0);
if (snd_pcm_sw_params(handle, swparams) < 0) {
- error("unable to install sw params:");
+ error(_("unable to install sw params:"));
snd_pcm_sw_params_dump(swparams, log);
exit(EXIT_FAILURE);
}
chunk_bytes = chunk_size * bits_per_frame / 8;
audiobuf = realloc(audiobuf, chunk_bytes);
if (audiobuf == NULL) {
- error("not enough memory");
+ error(_("not enough memory"));
exit(EXIT_FAILURE);
}
// fprintf(stderr, "real chunk_size = %i, frags = %i, total = %i\n", chunk_size, setup.buf.block.frags, setup.buf.block.frags * chunk_size);
snd_pcm_status_alloca(&status);
if ((res = snd_pcm_status(handle, status))<0) {
- error("status error: %s", snd_strerror(res));
+ error(_("status error: %s"), snd_strerror(res));
exit(EXIT_FAILURE);
}
if (snd_pcm_status_get_state(status) == SND_PCM_STATE_XRUN) {
gettimeofday(&now, 0);
snd_pcm_status_get_trigger_tstamp(status, &tstamp);
timersub(&now, &tstamp, &diff);
- fprintf(stderr, "%s!!! (at least %.3f ms long)\n",
- stream == SND_PCM_STREAM_PLAYBACK ? "underrun" : "overrun",
+ fprintf(stderr, _("%s!!! (at least %.3f ms long)\n"),
+ stream == SND_PCM_STREAM_PLAYBACK ? _("underrun") : _("overrun"),
diff.tv_sec * 1000 + diff.tv_usec / 1000.0);
if (verbose) {
- fprintf(stderr, "Status:\n");
+ fprintf(stderr, _("Status:\n"));
snd_pcm_status_dump(status, log);
}
if ((res = snd_pcm_prepare(handle))<0) {
- error("xrun: prepare error: %s", snd_strerror(res));
+ error(_("xrun: prepare error: %s"), snd_strerror(res));
exit(EXIT_FAILURE);
}
return; /* ok, data should be accepted again */
} if (snd_pcm_status_get_state(status) == SND_PCM_STATE_DRAINING) {
if (verbose) {
- fprintf(stderr, "Status(DRAINING):\n");
+ fprintf(stderr, _("Status(DRAINING):\n"));
snd_pcm_status_dump(status, log);
}
if (stream == SND_PCM_STREAM_CAPTURE) {
- fprintf(stderr, "capture stream format change? attempting recover...\n");
+ fprintf(stderr, _("capture stream format change? attempting recover...\n"));
if ((res = snd_pcm_prepare(handle))<0) {
- error("xrun(DRAINING): prepare error: %s", snd_strerror(res));
+ error(_("xrun(DRAINING): prepare error: %s"), snd_strerror(res));
exit(EXIT_FAILURE);
}
return;
}
}
if (verbose) {
- fprintf(stderr, "Status(R/W):\n");
+ fprintf(stderr, _("Status(R/W):\n"));
snd_pcm_status_dump(status, log);
}
- error("read/write error, state = %s", snd_pcm_state_name(snd_pcm_status_get_state(status)));
+ error(_("read/write error, state = %s"), snd_pcm_state_name(snd_pcm_status_get_state(status)));
exit(EXIT_FAILURE);
}
int res;
if (!quiet_mode)
- fprintf(stderr, "Suspended. Trying resume. "); fflush(stderr);
+ fprintf(stderr, _("Suspended. Trying resume. ")); fflush(stderr);
while ((res = snd_pcm_resume(handle)) == -EAGAIN)
sleep(1); /* wait until suspend flag is released */
if (res < 0) {
if (!quiet_mode)
- fprintf(stderr, "Failed. Restarting stream. "); fflush(stderr);
+ fprintf(stderr, _("Failed. Restarting stream. ")); fflush(stderr);
if ((res = snd_pcm_prepare(handle)) < 0) {
- error("suspend: prepare error: %s", snd_strerror(res));
+ error(_("suspend: prepare error: %s"), snd_strerror(res));
exit(EXIT_FAILURE);
}
}
if (!quiet_mode)
- fprintf(stderr, "Done.\n");
+ fprintf(stderr, _("Done.\n"));
}
/* peak handler */
max = 1 << (bits_per_sample-1);
if (max <= 0)
max = 0x7fffffff;
- printf("Max peak (%li samples): %05i (0x%04x) ", (long)ocount, max_peak, max_peak);
+ printf(_("Max peak (%li samples): %05i (0x%04x) "), (long)ocount, max_peak, max_peak);
if (bits_per_sample > 16)
perc = max_peak / (max / 100);
else
} else if (r == -ESTRPIPE) {
suspend();
} else if (r < 0) {
- error("write error: %s", snd_strerror(r));
+ error(_("write error: %s"), snd_strerror(r));
exit(EXIT_FAILURE);
}
if (r > 0) {
} else if (r == -ESTRPIPE) {
suspend();
} else if (r < 0) {
- error("writev error: %s", snd_strerror(r));
+ error(_("writev error: %s"), snd_strerror(r));
exit(EXIT_FAILURE);
}
if (r > 0) {
} else if (r == -ESTRPIPE) {
suspend();
} else if (r < 0) {
- error("read error: %s", snd_strerror(r));
+ error(_("read error: %s"), snd_strerror(r));
exit(EXIT_FAILURE);
}
if (r > 0) {
} else if (r == -ESTRPIPE) {
suspend();
} else if (r < 0) {
- error("readv error: %s", snd_strerror(r));
+ error(_("readv error: %s"), snd_strerror(r));
exit(EXIT_FAILURE);
}
if (r > 0) {
buf = (char *) malloc(chunk_bytes);
if (buf == NULL) {
- error("can't allocate buffer for silence");
+ error(_("can't allocate buffer for silence"));
return; /* not fatal error */
}
snd_pcm_format_set_silence(hwparams.format, buf, chunk_size * hwparams.channels);
if (l > chunk_size)
l = chunk_size;
if (voc_pcm_write(buf, l) != (ssize_t)l) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
x -= l;
size_t b;
if (sleep_min == 0) {
if (snd_pcm_format_set_silence(hwparams.format, audiobuf + buffer_pos, chunk_bytes - buffer_pos * 8 / bits_per_sample) < 0)
- fprintf(stderr, "voc_pcm_flush - silence error");
+ fprintf(stderr, _("voc_pcm_flush - silence error"));
b = chunk_size;
} else {
b = buffer_pos * 8 / bits_per_frame;
}
if (pcm_write(audiobuf, b) != (ssize_t)b)
- error("voc_pcm_flush error");
+ error(_("voc_pcm_flush error"));
}
snd_pcm_drain(handle);
}
data = buf = (u_char *)malloc(64 * 1024);
buffer_pos = 0;
if (data == NULL) {
- error("malloc error");
+ error(_("malloc error"));
exit(EXIT_FAILURE);
}
if (!quiet_mode) {
- fprintf(stderr, "Playing Creative Labs Channel file '%s'...\n", name);
+ fprintf(stderr, _("Playing Creative Labs Channel file '%s'...\n"), name);
}
/* first we waste the rest of header, ugly but we don't need seek */
while (ofs > (ssize_t)chunk_bytes) {
if ((size_t)safe_read(fd, buf, chunk_bytes) != chunk_bytes) {
- error("read error");
+ error(_("read error"));
exit(EXIT_FAILURE);
}
ofs -= chunk_bytes;
}
if (ofs) {
if (safe_read(fd, buf, ofs) != ofs) {
- error("read error");
+ error(_("read error"));
exit(EXIT_FAILURE);
}
}
d_printf("Channel data %d Hz\n", dsp_speed);
#endif
if (vd->pack) { /* /dev/dsp can't it */
- error("can't play packed .voc files");
+ error(_("can't play packed .voc files"));
return;
}
if (hwparams.channels == 2) /* if we are in Stereo-Mode, switch back */
#endif
if (filepos >= 0) { /* if < 0, one seek fails, why test another */
if ((filepos = lseek64(fd, 0, 1)) < 0) {
- error("can't play loops; %s isn't seekable\n", name);
+ error(_("can't play loops; %s isn't seekable\n"), name);
repeat = 0;
} else {
filepos -= in_buffer; /* set filepos after repeat */
if (hwparams.channels == 2)
hwparams.rate = hwparams.rate >> 1;
if (eb->pack) { /* /dev/dsp can't it */
- error("can't play packed .voc files");
+ error(_("can't play packed .voc files"));
return;
}
#if 0
#endif
break;
default:
- error("unknown blocktype %d. terminate.", bp->type);
+ error(_("unknown blocktype %d. terminate."), bp->type);
return;
} /* switch (bp->type) */
} /* while (! nextblock) */
if (l) {
if (output && !quiet_mode) {
if (write(2, data, l) != l) { /* to stderr */
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
} else {
if (voc_pcm_write(data, l) != l) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
}
vh.coded_ver = LE_SHORT(0x1233 - VOC_ACTUAL_VERSION);
if (write(fd, &vh, sizeof(VocHeader)) != sizeof(VocHeader)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
if (hwparams.channels > 1) {
bt.datalen = 4;
bt.datalen_m = bt.datalen_h = 0;
if (write(fd, &bt, sizeof(VocBlockType)) != sizeof(VocBlockType)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
eb.tc = LE_SHORT(65536 - 256000000L / (hwparams.rate << 1));
eb.pack = 0;
eb.mode = 1;
if (write(fd, &eb, sizeof(VocExtBlock)) != sizeof(VocExtBlock)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
}
bt.datalen_m = (u_char) ((cnt & 0xFF00) >> 8);
bt.datalen_h = (u_char) ((cnt & 0xFF0000) >> 16);
if (write(fd, &bt, sizeof(VocBlockType)) != sizeof(VocBlockType)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
vd.tc = (u_char) (256 - (1000000 / hwparams.rate));
vd.pack = 0;
if (write(fd, &vd, sizeof(VocVoiceData)) != sizeof(VocVoiceData)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
}
bits = 24;
break;
default:
- error("Wave doesn't support %s format...", snd_pcm_format_name(hwparams.format));
+ error(_("Wave doesn't support %s format..."), snd_pcm_format_name(hwparams.format));
exit(EXIT_FAILURE);
}
h.magic = WAV_RIFF;
write(fd, &cf, sizeof(WaveChunkHeader)) != sizeof(WaveChunkHeader) ||
write(fd, &f, sizeof(WaveFmtBody)) != sizeof(WaveFmtBody) ||
write(fd, &cd, sizeof(WaveChunkHeader)) != sizeof(WaveChunkHeader)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
}
ah.encoding = BE_INT(AU_FMT_LIN16);
break;
default:
- error("Sparc Audio doesn't support %s format...", snd_pcm_format_name(hwparams.format));
+ error(_("Sparc Audio doesn't support %s format..."), snd_pcm_format_name(hwparams.format));
exit(EXIT_FAILURE);
}
ah.sample_rate = BE_INT(hwparams.rate);
ah.channels = BE_INT(hwparams.channels);
if (write(fd, &ah, sizeof(AuHeader)) != sizeof(AuHeader)) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
}
char dummy = 0; /* Write a Terminator */
if (write(fd, &dummy, 1) != 1) {
- error("write error");
+ error(_("write error"));
exit(EXIT_FAILURE);
}
length_seek = sizeof(VocHeader);
{
if (!quiet_mode) {
fprintf(stderr, "%s %s '%s' : ",
- (stream == SND_PCM_STREAM_PLAYBACK) ? "Playing" : "Recording",
- fmt_rec_table[rtype].what,
+ (stream == SND_PCM_STREAM_PLAYBACK) ? _("Playing") : _("Recording"),
+ gettext(fmt_rec_table[rtype].what),
name);
fprintf(stderr, "%s, ", snd_pcm_format_description(hwparams.format));
- fprintf(stderr, "Rate %d Hz, ", hwparams.rate);
+ fprintf(stderr, _("Rate %d Hz, "), hwparams.rate);
if (hwparams.channels == 1)
- fprintf(stderr, "Mono");
+ fprintf(stderr, _("Mono"));
else if (hwparams.channels == 2)
- fprintf(stderr, "Stereo");
+ fprintf(stderr, _("Stereo"));
else
- fprintf(stderr, "Channels %i", hwparams.channels);
+ fprintf(stderr, _("Channels %i"), hwparams.channels);
fprintf(stderr, "\n");
}
}
/* read the file header */
dta = sizeof(AuHeader);
if ((size_t)safe_read(fd, audiobuf, dta) != dta) {
- error("read error");
+ error(_("read error"));
exit(EXIT_FAILURE);
}
if (test_au(fd, audiobuf) >= 0) {
dta = sizeof(VocHeader);
if ((size_t)safe_read(fd, audiobuf + sizeof(AuHeader),
dta - sizeof(AuHeader)) != dta - sizeof(AuHeader)) {
- error("read error");
+ error(_("read error"));
exit(EXIT_FAILURE);
}
if ((ofs = test_vocfile(audiobuf)) >= 0) {
}
alloced = 1;
} else if (count != channels) {
- error("You need to specify %d files", channels);
+ error(_("You need to specify %d files"), channels);
exit(EXIT_FAILURE);
}
}
alloced = 1;
} else if (count != channels) {
- error("You need to specify %d files", channels);
+ error(_("You need to specify %d files"), channels);
exit(EXIT_FAILURE);
}
SAVE_UTIL_VERSION
AC_OUTPUT(Makefile alsactl/Makefile alsamixer/Makefile amidi/Makefile amixer/Makefile \
- m4/Makefile \
+ m4/Makefile po/Makefile.in \
alsaconf/alsaconf alsaconf/Makefile \
alsaconf/po/Makefile \
aplay/Makefile include/Makefile iecset/Makefile utils/Makefile \
--- /dev/null
+#ifndef __MY_GETTEXT_H
+#define __MY_GETTEXT_H
+
+#if ENABLE_NLS
+# include <libintl.h>
+#else
+# define gettext(msgid) (msgid)
+# define textdomain(domain)
+# define bindtextdomain(domain, dir)
+#endif
+
+#define _(msgid) gettext (msgid)
+#define gettext_noop(msgid) msgid
+#define N_(msgid) gettext_noop (msgid)
+
+#endif /* __MY_GETTEXT_H */
--- /dev/null
+# Makefile for PO directory in any package using GNU gettext.
+# Copyright (C) 1995-1997, 2000-2004 by Ulrich Drepper <drepper@gnu.ai.mit.edu>
+#
+# This file can be copied and used freely without restrictions. It can
+# be used in projects which are not available under the GNU General Public
+# License but which still want to provide support for the GNU gettext
+# functionality.
+# Please note that the actual code of GNU gettext is covered by the GNU
+# General Public License and is *not* in the public domain.
+#
+# Origin: gettext-0.14
+
+PACKAGE = @PACKAGE@
+VERSION = @VERSION@
+
+SHELL = /bin/sh
+@SET_MAKE@
+
+srcdir = @srcdir@
+top_srcdir = @top_srcdir@
+VPATH = @srcdir@
+
+prefix = @prefix@
+exec_prefix = @exec_prefix@
+datadir = @datadir@
+localedir = $(datadir)/locale
+gettextsrcdir = $(datadir)/gettext/po
+
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+MKINSTALLDIRS = @MKINSTALLDIRS@
+mkinstalldirs = $(SHELL) $(MKINSTALLDIRS)
+
+GMSGFMT = @GMSGFMT@
+MSGFMT = @MSGFMT@
+XGETTEXT = @XGETTEXT@
+MSGMERGE = msgmerge
+MSGMERGE_UPDATE = @MSGMERGE@ --update
+MSGINIT = msginit
+MSGCONV = msgconv
+MSGFILTER = msgfilter
+
+POFILES = @POFILES@
+GMOFILES = @GMOFILES@
+UPDATEPOFILES = @UPDATEPOFILES@
+DUMMYPOFILES = @DUMMYPOFILES@
+DISTFILES.common = Makefile.in.in remove-potcdate.sin \
+$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)
+DISTFILES = $(DISTFILES.common) Makevars POTFILES.in $(DOMAIN).pot stamp-po \
+$(POFILES) $(GMOFILES) \
+$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)
+
+POTFILES = \
+
+CATALOGS = @CATALOGS@
+
+# Makevars gets inserted here. (Don't remove this line!)
+
+.SUFFIXES:
+.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update
+
+.po.mo:
+ @echo "$(MSGFMT) -c -o $@ $<"; \
+ $(MSGFMT) -c -o t-$@ $< && mv t-$@ $@
+
+.po.gmo:
+ @lang=`echo $* | sed -e 's,.*/,,'`; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \
+ cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo
+
+.sin.sed:
+ sed -e '/^#/d' $< > t-$@
+ mv t-$@ $@
+
+
+all: all-@USE_NLS@
+
+all-yes: stamp-po
+all-no:
+
+# stamp-po is a timestamp denoting the last time at which the CATALOGS have
+# been loosely updated. Its purpose is that when a developer or translator
+# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,
+# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent
+# invocations of "make" will do nothing. This timestamp would not be necessary
+# if updating the $(CATALOGS) would always touch them; however, the rule for
+# $(POFILES) has been designed to not touch files that don't need to be
+# changed.
+stamp-po: $(srcdir)/$(DOMAIN).pot
+ test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)
+ @echo "touch stamp-po"
+ @echo timestamp > stamp-poT
+ @mv stamp-poT stamp-po
+
+# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',
+# otherwise packages like GCC can not be built if only parts of the source
+# have been downloaded.
+
+# This target rebuilds $(DOMAIN).pot; it is an expensive operation.
+# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.
+$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed
+ $(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \
+ --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \
+ --files-from=$(srcdir)/POTFILES.in \
+ --copyright-holder='$(COPYRIGHT_HOLDER)' \
+ --msgid-bugs-address='$(MSGID_BUGS_ADDRESS)'
+ test ! -f $(DOMAIN).po || { \
+ if test -f $(srcdir)/$(DOMAIN).pot; then \
+ sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \
+ sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \
+ if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \
+ else \
+ rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ else \
+ mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \
+ fi; \
+ }
+
+# This rule has no dependencies: we don't need to update $(DOMAIN).pot at
+# every "make" invocation, only create it when it is missing.
+# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.
+$(srcdir)/$(DOMAIN).pot:
+ $(MAKE) $(DOMAIN).pot-update
+
+# This target rebuilds a PO file if $(DOMAIN).pot has changed.
+# Note that a PO file is not touched if it doesn't need to be changed.
+$(POFILES): $(srcdir)/$(DOMAIN).pot
+ @lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \
+ if test -f "$(srcdir)/$${lang}.po"; then \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \
+ cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \
+ else \
+ $(MAKE) $${lang}.po-create; \
+ fi
+
+
+install: install-exec install-data
+install-exec:
+install-data: install-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ $(INSTALL_DATA) $(srcdir)/$$file \
+ $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ for file in Makevars; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+install-data-no: all
+install-data-yes: all
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \
+ $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \
+ echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \
+ cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \
+ fi; \
+ done; \
+ done
+
+install-strip: install
+
+installdirs: installdirs-exec installdirs-data
+installdirs-exec:
+installdirs-data: installdirs-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ $(mkinstalldirs) $(DESTDIR)$(gettextsrcdir); \
+ else \
+ : ; \
+ fi
+installdirs-data-no:
+installdirs-data-yes:
+ $(mkinstalldirs) $(DESTDIR)$(datadir)
+ @catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ dir=$(localedir)/$$lang/LC_MESSAGES; \
+ $(mkinstalldirs) $(DESTDIR)$$dir; \
+ for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \
+ if test -n "$$lc"; then \
+ if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \
+ link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \
+ mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \
+ for file in *; do \
+ if test -f $$file; then \
+ ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \
+ fi; \
+ done); \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \
+ else \
+ if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \
+ :; \
+ else \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \
+ fi; \
+ fi; \
+ fi; \
+ done; \
+ done
+
+# Define this as empty until I found a useful application.
+installcheck:
+
+uninstall: uninstall-exec uninstall-data
+uninstall-exec:
+uninstall-data: uninstall-data-@USE_NLS@
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ for file in $(DISTFILES.common) Makevars.template; do \
+ rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \
+ done; \
+ else \
+ : ; \
+ fi
+uninstall-data-no:
+uninstall-data-yes:
+ catalogs='$(CATALOGS)'; \
+ for cat in $$catalogs; do \
+ cat=`basename $$cat`; \
+ lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \
+ for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \
+ rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \
+ done; \
+ done
+
+check: all
+
+info dvi ps pdf html tags TAGS ctags CTAGS ID:
+
+mostlyclean:
+ rm -f remove-potcdate.sed
+ rm -f stamp-poT
+ rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po
+ rm -fr *.o
+
+clean: mostlyclean
+
+distclean: clean
+ rm -f Makefile Makefile.in POTFILES *.mo
+
+maintainer-clean: distclean
+ @echo "This command is intended for maintainers to use;"
+ @echo "it deletes files that may require special tools to rebuild."
+ rm -f stamp-po $(GMOFILES)
+
+distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)
+dist distdir:
+ $(MAKE) update-po
+ @$(MAKE) dist2
+# This is a separate target because 'update-po' must be executed before.
+dist2: $(DISTFILES)
+ dists="$(DISTFILES)"; \
+ if test "$(PACKAGE)" = "gettext-tools"; then \
+ dists="$$dists Makevars.template"; \
+ fi; \
+ if test -f $(srcdir)/ChangeLog; then \
+ dists="$$dists ChangeLog"; \
+ fi; \
+ for i in 0 1 2 3 4 5 6 7 8 9; do \
+ if test -f $(srcdir)/ChangeLog.$$i; then \
+ dists="$$dists ChangeLog.$$i"; \
+ fi; \
+ done; \
+ if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \
+ for file in $$dists; do \
+ if test -f $$file; then \
+ cp -p $$file $(distdir); \
+ else \
+ cp -p $(srcdir)/$$file $(distdir); \
+ fi; \
+ done
+
+update-po: Makefile
+ $(MAKE) $(DOMAIN).pot-update
+ test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)
+ $(MAKE) update-gmo
+
+# General rule for creating PO files.
+
+.nop.po-create:
+ @lang=`echo $@ | sed -e 's/\.po-create$$//'`; \
+ echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \
+ exit 1
+
+# General rule for updating PO files.
+
+.nop.po-update:
+ @lang=`echo $@ | sed -e 's/\.po-update$$//'`; \
+ if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \
+ echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \
+ cd $(srcdir); \
+ if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "msgmerge for $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+$(DUMMYPOFILES):
+
+update-gmo: Makefile $(GMOFILES)
+ @:
+
+Makefile: Makefile.in.in $(top_builddir)/config.status @POMAKEFILEDEPS@
+ cd $(top_builddir) \
+ && CONFIG_FILES=$(subdir)/$@.in CONFIG_HEADERS= \
+ $(SHELL) ./config.status
+
+force:
+
+# Tell versions [3.59,3.63) of GNU make not to export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:
--- /dev/null
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
--- /dev/null
+# Makefile variables for PO directory in any package using GNU gettext.
+
+# Usually the message domain is the same as the package name.
+DOMAIN = $(PACKAGE)
+
+# These two variables depend on the location of this directory.
+subdir = po
+top_builddir = ..
+
+# These options get passed to xgettext.
+XGETTEXT_OPTIONS = --keyword=_ --keyword=N_
+
+# This is the copyright holder that gets inserted into the header of the
+# $(DOMAIN).pot file. Set this to the copyright holder of the surrounding
+# package. (Note that the msgstr strings, extracted from the package's
+# sources, belong to the copyright holder of the package.) Translators are
+# expected to transfer the copyright for their translations to this person
+# or entity, or to disclaim their copyright. The empty string stands for
+# the public domain; in this case the translators are expected to disclaim
+# their copyright.
+COPYRIGHT_HOLDER = Free Software Foundation, Inc.
+
+# This is the email address or URL to which the translators shall report
+# bugs in the untranslated strings:
+# - Strings which are not entire sentences, see the maintainer guidelines
+# in the GNU gettext documentation, section 'Preparing Strings'.
+# - Strings which use unclear terms or require additional context to be
+# understood.
+# - Strings which make invalid assumptions about notation of date, time or
+# money.
+# - Pluralisation problems.
+# - Incorrect English spelling.
+# - Incorrect formatting.
+# It can be your email address, or a mailing list address where translators
+# can write to without being subscribed, or the URL of a web page through
+# which the translators can contact you.
+MSGID_BUGS_ADDRESS =
+
+# This is the list of locale categories, beyond LC_MESSAGES, for which the
+# message catalogs shall be used. It is usually empty.
+EXTRA_LOCALE_CATEGORIES =
--- /dev/null
+aplay/aplay.c
+seq/aconnect/aconnect.c
+seq/aseqnet/aseqnet.c
+speaker-test/speaker-test.c
--- /dev/null
+# Special Makefile rules for English message catalogs with quotation marks.
+
+DISTFILES.common.extra1 = quot.sed boldquot.sed en@quot.header en@boldquot.header insert-header.sin Rules-quot
+
+.SUFFIXES: .insert-header .po-update-en
+
+en@quot.po-create:
+ $(MAKE) en@quot.po-update
+en@boldquot.po-create:
+ $(MAKE) en@boldquot.po-update
+
+en@quot.po-update: en@quot.po-update-en
+en@boldquot.po-update: en@boldquot.po-update-en
+
+.insert-header.po-update-en:
+ @lang=`echo $@ | sed -e 's/\.po-update-en$$//'`; \
+ if test "$(PACKAGE)" = "gettext"; then PATH=`pwd`/../src:$$PATH; GETTEXTLIBDIR=`cd $(top_srcdir)/src && pwd`; export GETTEXTLIBDIR; fi; \
+ tmpdir=`pwd`; \
+ echo "$$lang:"; \
+ ll=`echo $$lang | sed -e 's/@.*//'`; \
+ LC_ALL=C; export LC_ALL; \
+ cd $(srcdir); \
+ if $(MSGINIT) -i $(DOMAIN).pot --no-translator -l $$ll -o - 2>/dev/null | sed -f $$tmpdir/$$lang.insert-header | $(MSGCONV) -t UTF-8 | $(MSGFILTER) sed -f `echo $$lang | sed -e 's/.*@//'`.sed 2>/dev/null > $$tmpdir/$$lang.new.po; then \
+ if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \
+ rm -f $$tmpdir/$$lang.new.po; \
+ else \
+ if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \
+ :; \
+ else \
+ echo "creation of $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \
+ exit 1; \
+ fi; \
+ fi; \
+ else \
+ echo "creation of $$lang.po failed!" 1>&2; \
+ rm -f $$tmpdir/$$lang.new.po; \
+ fi
+
+en@quot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@quot.header/g' $(srcdir)/insert-header.sin > en@quot.insert-header
+
+en@boldquot.insert-header: insert-header.sin
+ sed -e '/^#/d' -e 's/HEADER/en@boldquot.header/g' $(srcdir)/insert-header.sin > en@boldquot.insert-header
+
+mostlyclean: mostlyclean-quot
+mostlyclean-quot:
+ rm -f *.insert-header
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
+s/“/“\e[1m/g
+s/”/\e[0m”/g
+s/‘/‘\e[1m/g
+s/’/\e[0m’/g
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
+# This catalog furthermore displays the text between the quotation marks in
+# bold face, assuming the VT100/XTerm escape sequences.
+#
--- /dev/null
+# All this catalog "translates" are quotation characters.
+# The msgids must be ASCII and therefore cannot contain real quotation
+# characters, only substitutes like grave accent (0x60), apostrophe (0x27)
+# and double quote (0x22). These substitutes look strange; see
+# http://www.cl.cam.ac.uk/~mgk25/ucs/quotes.html
+#
+# This catalog translates grave accent (0x60) and apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019).
+# It also translates pairs of apostrophe (0x27) to
+# left single quotation mark (U+2018) and right single quotation mark (U+2019)
+# and pairs of quotation mark (0x22) to
+# left double quotation mark (U+201C) and right double quotation mark (U+201D).
+#
+# When output to an UTF-8 terminal, the quotation characters appear perfectly.
+# When output to an ISO-8859-1 terminal, the single quotation marks are
+# transliterated to apostrophes (by iconv in glibc 2.2 or newer) or to
+# grave/acute accent (by libiconv), and the double quotation marks are
+# transliterated to 0x22.
+# When output to an ASCII terminal, the single quotation marks are
+# transliterated to apostrophes, and the double quotation marks are
+# transliterated to 0x22.
+#
--- /dev/null
+# Sed script that inserts the file called HEADER before the header entry.
+#
+# At each occurrence of a line starting with "msgid ", we execute the following
+# commands. At the first occurrence, insert the file. At the following
+# occurrences, do nothing. The distinction between the first and the following
+# occurrences is achieved by looking at the hold space.
+/^msgid /{
+x
+# Test if the hold space is empty.
+s/m/m/
+ta
+# Yes it was empty. First occurrence. Read the file.
+r HEADER
+# Output the file's contents by reading the next line. But don't lose the
+# current line while doing this.
+g
+N
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
--- /dev/null
+# Japanese translations for alsa-utils package
+# alsa-utils パッケージに対する英訳.
+# Copyright (C) 2005 Free Software Foundation, Inc.
+# This file is distributed under the same license as the alsa-utils package.
+# Takashi Iwai <tiwai@suse.de>, 2005.
+#
+msgid ""
+msgstr ""
+"Project-Id-Version: alsa-utils 1.0.9a\n"
+"Report-Msgid-Bugs-To: \n"
+"POT-Creation-Date: 2005-06-03 15:10+0200\n"
+"PO-Revision-Date: 2005-06-16 16:50+0200\n"
+"Last-Translator: Takashi Iwai <tiwai@suse.de>\n"
+"Language-Team: Japanese\n"
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+"Plural-Forms: nplurals=1; plural=0;\n"
+
+#: aplay/aplay.c:126
+msgid "raw data"
+msgstr "raw データ"
+
+#: aplay/aplay.c:127
+msgid "VOC"
+msgstr "VOC"
+
+#: aplay/aplay.c:128
+msgid "WAVE"
+msgstr "WAVE"
+
+#: aplay/aplay.c:129
+msgid "Sparc Audio"
+msgstr "Sparc オーディオ"
+
+#: aplay/aplay.c:150
+#, c-format
+msgid ""
+"Usage: %s [OPTION]... [FILE]...\n"
+"\n"
+"-h, --help help\n"
+" --version print current version\n"
+"-l, --list-devices list all soundcards and digital audio devices\n"
+"-L, --list-pcms list all PCMs defined\n"
+"-D, --device=NAME select PCM by name\n"
+"-q, --quiet quiet mode\n"
+"-t, --file-type TYPE file type (voc, wav, raw or au)\n"
+"-c, --channels=# channels\n"
+"-f, --format=FORMAT sample format (case insensitive)\n"
+"-r, --rate=# sample rate\n"
+"-d, --duration=# interrupt after # seconds\n"
+"-s, --sleep-min=# min ticks to sleep\n"
+"-M, --mmap mmap stream\n"
+"-N, --nonblock nonblocking mode\n"
+"-F, --period-time=# distance between interrupts is # microseconds\n"
+"-B, --buffer-time=# buffer duration is # microseconds\n"
+" --period-size=# distance between interrupts is # frames\n"
+" --buffer-size=# buffer duration is # frames\n"
+"-A, --avail-min=# min available space for wakeup is # microseconds\n"
+"-R, --start-delay=# delay for automatic PCM start is # microseconds \n"
+" (relative to buffer size if <= 0)\n"
+"-T, --stop-delay=# delay for automatic PCM stop is # microseconds from "
+"xrun\n"
+"-v, --verbose show PCM structure and setup (accumulative)\n"
+"-I, --separate-channels one file for each channel\n"
+msgstr ""
+"使用法: %s [オプション]... [ファイル]...\n"
+"\n"
+"-h, --help ヘルプ\n"
+" --version 現在のバージョンを表示\n"
+"-l, --list-devices 全てのサウンドカードとオーディオデバイスを表示\n"
+"-L, --list-pcms 全ての定義された PCM を表示\n"
+"-D, --device=NAME 使用する PCM を指定\n"
+"-q, --quiet quiet モード\n"
+"-t, --file-type TYPE ファイルタイプ (voc, wav, raw または au)\n"
+"-c, --channels=# チャネル数\n"
+"-f, --format=FORMAT サンプルフォーマット (大／小文字区別)\n"
+"-r, --rate=# サンプルレート\n"
+"-d, --duration=# 指定の秒数後に終了\n"
+"-s, --sleep-min=# sleep する最少 tick 数\n"
+"-M, --mmap mmap ストリーム\n"
+"-N, --nonblock 非ブロックモード\n"
+"-F, --period-time=# 割り込み間隔をμ秒で指定\n"
+"-B, --buffer-time=# バッファの大きさをμ秒で指定\n"
+" --period-size=# 割り込み間隔をフレーム数で指定\n"
+" --buffer-size=# バッファの大きさをフレーム数で指定\n"
+"-A, --avail-min=# wakeup の最少スペースをμ秒で指定\n"
+"-R, --start-delay=# 指定のμ秒後に PCM を自動スタート\n"
+" (0 以下の場合はバッファサイズより)\n"
+"-T, --stop-delay=# XRUN から指定のμ秒後に PCM の自動停止\n"
+"-v, --verbose PCM の設定を表示 (複数指定可能)\n"
+"-I, --separate-channels 各チャネルに一つのファイルを用いる\n"
+
+#: aplay/aplay.c:177 speaker-test/speaker-test.c:465
+#, c-format
+msgid "Recognized sample formats are:"
+msgstr "認識されるサンプルフォーマット:"
+
+#: aplay/aplay.c:183
+#, c-format
+msgid ""
+"\n"
+"Some of these may not be available on selected hardware\n"
+msgstr "\nこれらのいくつかは指定のハードウェアで使用不可能な場合があります"
+
+#: aplay/aplay.c:184
+#, c-format
+msgid "The availabled format shortcuts are:\n"
+msgstr "可能なフォーマットの省略形:"
+
+#: aplay/aplay.c:185
+#, c-format
+msgid "-f cd (16 bit little endian, 44100, stereo)\n"
+msgstr "-f cd (16 ビット、リトルエンディアン、44100、ステレオ)"
+
+#: aplay/aplay.c:186
+#, c-format
+msgid "-f cdr (16 bit big endian, 44100, stereo)\n"
+msgstr "-f cdr (16 ビット、ビッグエンディアン、44100、ステレオ)"
+
+#: aplay/aplay.c:187
+#, c-format
+msgid "-f dat (16 bit little endian, 48000, stereo)\n"
+msgstr "-f dat (16 ビット、リトルエンディアン、48000、ステレオ)"
+
+#: aplay/aplay.c:197
+#, c-format
+msgid "snd_names_list error: %s"
+msgstr "snd_names_list エラー: %s"
+
+#: aplay/aplay.c:219
+msgid "no soundcards found..."
+msgstr "サウンドカードが見つかりません..."
+
+#: aplay/aplay.c:222
+#, c-format
+msgid "**** List of %s Hardware Devices ****\n"
+msgstr "**** ハードウェアデバイス %s のリスト ****\n"
+
+#: aplay/aplay.c:251
+#, c-format
+msgid "card %i: %s [%s], device %i: %s [%s]\n"
+msgstr "カード %i: %s [%s], デバイス %i: %s [%s]\n"
+
+#: aplay/aplay.c:257
+#, c-format
+msgid " Subdevices: %i/%i\n"
+msgstr " サブデバイス: %i/%i\n"
+
+#: aplay/aplay.c:264
+#, c-format
+msgid " Subdevice #%i: %s\n"
+msgstr " サブデバイス #%i: %s\n"
+
+#: aplay/aplay.c:292
+#, c-format
+msgid "PCM list:\n"
+msgstr "PCM リスト:\n"
+
+#: aplay/aplay.c:305
+#, c-format
+msgid "Aborted by signal %s...\n"
+msgstr "シグナル %s で中断...\n"
+
+#: aplay/aplay.c:384
+msgid "command should be named either arecord or aplay"
+msgstr "arecord または aplay コマンドのみ可能"
+
+#: aplay/aplay.c:426
+#, c-format
+msgid "unrecognized file format %s"
+msgstr "不正なファイルフォーマット %s"
+
+#: aplay/aplay.c:433
+#, c-format
+msgid "value %i for channels is invalid"
+msgstr "不正なチャネル数 %i"
+
+#: aplay/aplay.c:452
+#, c-format
+msgid "wrong extended format '%s'"
+msgstr "不正な拡張フォーマット '%s'"
+
+#: aplay/aplay.c:463
+#, c-format
+msgid "bad speed value %i"
+msgstr "不正なレート値 %i"
+
+#: aplay/aplay.c:519
+#, c-format
+msgid "Try `%s --help' for more information.\n"
+msgstr "より詳しい情報は「%s --help」を実行してください\n"
+
+#: aplay/aplay.c:540
+#, c-format
+msgid "audio open error: %s"
+msgstr ""
+
+#: aplay/aplay.c:545
+#, c-format
+msgid "info error: %s"
+msgstr ""
+
+#: aplay/aplay.c:552
+#, c-format
+msgid "nonblock setting error: %s"
+msgstr ""
+
+#: aplay/aplay.c:562 aplay/aplay.c:666 aplay/aplay.c:1009
+msgid "not enough memory"
+msgstr "メモリが足りません"
+
+#: aplay/aplay.c:656
+#, c-format
+msgid "read error (called from line %i)"
+msgstr "リードエラー (%i 行)"
+
+#: aplay/aplay.c:714
+#, c-format
+msgid "unknown length of 'fmt ' chunk (read %u, should be %u at least)"
+msgstr ""
+
+#: aplay/aplay.c:722
+msgid "can't play not PCM-coded WAVE-files"
+msgstr "PCM 以外の WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:726
+#, c-format
+msgid "can't play WAVE-files with %d tracks"
+msgstr "%d トラックを含む WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:734 aplay/aplay.c:831
+#, c-format
+msgid "Warning: format is changed to U8\n"
+msgstr "警告: フォーマットは U8 に変更されます\n"
+
+#: aplay/aplay.c:740
+#, c-format
+msgid "Warning: format is changed to S16_LE\n"
+msgstr "警告: フォーマットは S16_LE に変更されます\n"
+
+#: aplay/aplay.c:748
+#, c-format
+msgid "Warning: format is changed to S24_3LE\n"
+msgstr "警告: フォーマットは S24_3LE に変更されます\n"
+
+#: aplay/aplay.c:754
+#, c-format
+msgid "Warning: format is changed to S24_LE\n"
+msgstr "警告: フォーマットは S24_LE に変更されます\n"
+
+#: aplay/aplay.c:758
+#, c-format
+msgid ""
+" can't play WAVE-files with sample %d bits in %d bytes wide (%d channels)"
+msgstr "%2$d バイト長 %1$d サンプルビット (%3$d チャネル) の WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:767
+#, c-format
+msgid " can't play WAVE-files with sample %d bits wide"
+msgstr "%d ビット長のサンプルの WAVE ファイルは再生できません"
+
+#: aplay/aplay.c:825
+#, c-format
+msgid "Warning: format is changed to MU_LAW\n"
+msgstr "警告: フォーマットは MU_LAW に変更されます\n"
+
+#: aplay/aplay.c:837
+#, c-format
+msgid "Warning: format is changed to S16_BE\n"
+msgstr "警告: フォーマットは S16_BE に変更されます\n"
+
+#: aplay/aplay.c:850 aplay/aplay.c:1412 aplay/aplay.c:1419 aplay/aplay.c:1966
+#: aplay/aplay.c:1978
+msgid "read error"
+msgstr "リードエラー"
+
+#: aplay/aplay.c:870
+msgid "Broken configuration for this PCM: no configurations available"
+msgstr "指定の PCM を使用できません: 設定がありません"
+
+#: aplay/aplay.c:887
+msgid "Access type not available"
+msgstr "アクセスタイプが使用不可能"
+
+#: aplay/aplay.c:892
+msgid "Sample format non available"
+msgstr "サンプルフォーマットが使用不可能"
+
+#: aplay/aplay.c:897
+msgid "Channels count non available"
+msgstr "チャネル数が使用不可能"
+
+#: aplay/aplay.c:910
+#, c-format
+msgid "Warning: rate is not accurate (requested = %iHz, got = %iHz)\n"
+msgstr "警告: レートが不正確です (要求値 = %iHz, 使用値 = %iHz)\n"
+
+#: aplay/aplay.c:911
+#, c-format
+msgid " please, try the plug plugin (-Dplug:%s)\n"
+msgstr " plug プラグイン (-Dplug:%s) を使用してください"
+
+#: aplay/aplay.c:945
+msgid "Unable to install hw params:"
+msgstr "hw params のインストールに失敗しました:"
+
+#: aplay/aplay.c:952
+#, c-format
+msgid "Can't use period equal to buffer size (%lu == %lu)"
+msgstr "period と buffer サイズには同じ値を使用できません (%lu == %lu)"
+
+#: aplay/aplay.c:959
+msgid "Unable to obtain xfer align\n"
+msgstr "xfer align 値を得ることができません\n"
+
+#: aplay/aplay.c:996
+msgid "unable to install sw params:"
+msgstr "sw params のインストールに失敗しました:"
+
+#: aplay/aplay.c:1035
+#, c-format
+msgid "status error: %s"
+msgstr "ステータスエラー: %s"
+
+#: aplay/aplay.c:1043
+#, c-format
+msgid "%s!!! (at least %.3f ms long)\n"
+msgstr "%s!!! (少なくとも %.3f ms)\n"
+
+#: aplay/aplay.c:1044
+msgid "underrun"
+msgstr "アンダーラン"
+
+#: aplay/aplay.c:1044
+msgid "overrun"
+msgstr "オーバーラン"
+
+#: aplay/aplay.c:1047
+#, c-format
+msgid "Status:\n"
+msgstr "ステータス:\n"
+
+#: aplay/aplay.c:1051
+#, c-format
+msgid "xrun: prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1057
+#, c-format
+msgid "Status(DRAINING):\n"
+msgstr "ステータス(DRAINING):\n"
+
+#: aplay/aplay.c:1061
+#, c-format
+msgid "capture stream format change? attempting recover...\n"
+msgstr "録音ストリームのフォーマットが変更？ 修復を試みます...\n"
+
+#: aplay/aplay.c:1063
+#, c-format
+msgid "xrun(DRAINING): prepare error: %s"
+msgstr ""
+
+#: aplay/aplay.c:1070
+#, c-format
+msgid "Status(R/W):\n"
+msgstr "ステータス(R/W):\n"
+
+#: aplay/aplay.c:1073
+#, c-format
+msgid "read/write error, state = %s"
+msgstr "読み書きエラー, ステータス = %s"
+
+#: aplay/aplay.c:1083
+#, c-format
+msgid "Suspended. Trying resume. "
+msgstr "サスペンド中です。レジュームします。"
+
+#: aplay/aplay.c:1088
+#, c-format
+msgid "Failed. Restarting stream. "
+msgstr "失敗しました。ストリームを再スタートします。"
+
+#: aplay/aplay.c:1090
+#, c-format
+msgid "suspend: prepare error: %s"
+msgstr "サスペンド: prepare エラー: %s"
+
+#: aplay/aplay.c:1095
+#, c-format
+msgid "Done.\n"
+msgstr "終了\n"
+
+#: aplay/aplay.c:1146
+#, c-format
+msgid "Max peak (%li samples): %05i (0x%04x) "
+msgstr "最大ピーク (%li サンプル): %05i (0x%04x) "
+
+#: aplay/aplay.c:1182
+#, c-format
+msgid "write error: %s"
+msgstr "書込エラー: %s"
+
+#: aplay/aplay.c:1224
+#, c-format
+msgid "writev error: %s"
+msgstr "書込(writev)エラー: %s"
+
+#: aplay/aplay.c:1263
+#, c-format
+msgid "read error: %s"
+msgstr "読込エラー: %s"
+
+#: aplay/aplay.c:1302
+#, c-format
+msgid "readv error: %s"
+msgstr "読込(readv)エラー"
+
+#: aplay/aplay.c:1350
+msgid "can't allocate buffer for silence"
+msgstr "サイレンス用のバッファの取得に失敗しました"
+
+#: aplay/aplay.c:1359 aplay/aplay.c:1587 aplay/aplay.c:1592 aplay/aplay.c:1639
+#: aplay/aplay.c:1648 aplay/aplay.c:1655 aplay/aplay.c:1665 aplay/aplay.c:1671
+#: aplay/aplay.c:1739 aplay/aplay.c:1769 aplay/aplay.c:1783
+msgid "write error"
+msgstr "書込エラー"
+
+#: aplay/aplay.c:1373
+#, c-format
+msgid "voc_pcm_flush - silence error"
+msgstr ""
+
+#: aplay/aplay.c:1379
+msgid "voc_pcm_flush error"
+msgstr ""
+
+#: aplay/aplay.c:1403
+msgid "malloc error"
+msgstr "malloc エラー"
+
+#: aplay/aplay.c:1407
+#, c-format
+msgid "Playing Creative Labs Channel file '%s'...\n"
+msgstr "Creative Labs Channel ファイル '%s' を演奏中...\n"
+
+#: aplay/aplay.c:1475 aplay/aplay.c:1567
+msgid "can't play packed .voc files"
+msgstr "packed .voc ファイルは演奏できません"
+
+#: aplay/aplay.c:1527
+#, c-format
+msgid "can't play loops; %s isn't seekable\n"
+msgstr "ループ演奏できません。%s はシーク不可能です\n"
+
+#: aplay/aplay.c:1576
+#, c-format
+msgid "unknown blocktype %d. terminate."
+msgstr "未知のブロックタイプ %d: 終了します。"
+
+#: aplay/aplay.c:1706
+#, c-format
+msgid "Wave doesn't support %s format..."
+msgstr "WAVE は %s フォーマットをサポートしません..."
+
+#: aplay/aplay.c:1763
+#, c-format
+msgid "Sparc Audio doesn't support %s format..."
+msgstr "Sparc オーディオは %s フォーマットをサポートしません..."
+
+#: aplay/aplay.c:1848
+msgid "Playing"
+msgstr "再生中"
+
+#: aplay/aplay.c:1848
+msgid "Recording"
+msgstr "録音中"
+
+#: aplay/aplay.c:1852
+#, c-format
+msgid "Rate %d Hz, "
+msgstr "レート %d Hz, "
+
+#: aplay/aplay.c:1854
+#, c-format
+msgid "Mono"
+msgstr "モノラル"
+
+#: aplay/aplay.c:1856
+#, c-format
+msgid "Stereo"
+msgstr "ステレオ"
+
+#: aplay/aplay.c:1858
+#, c-format
+msgid "Channels %i"
+msgstr "チャネル数 %i"
+
+#: aplay/aplay.c:2140 aplay/aplay.c:2193
+#, c-format
+msgid "You need to specify %d files"
+msgstr "%d 個のファイルを指定してください"
+
+#: seq/aconnect/aconnect.c:48
+#, c-format
+msgid "aconnect - ALSA sequencer connection manager\n"
+msgstr "aconnect - ALSA sequencer 接続マネージャ\n"
+
+#: seq/aconnect/aconnect.c:49
+#, c-format
+msgid "Copyright (C) 1999-2000 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aconnect/aconnect.c:50
+#, c-format
+msgid "Usage:\n"
+msgstr "使用法:\n"
+
+#: seq/aconnect/aconnect.c:51
+#, c-format
+msgid " * Connection/disconnection between two ports\n"
+msgstr " * 二つのポートの接続／切り離し\n"
+
+#: seq/aconnect/aconnect.c:52
+#, c-format
+msgid " aconnect [-options] sender receiver\n"
+msgstr " aconnect [-オプション] 送信 受信\n"
+
+#: seq/aconnect/aconnect.c:53
+#, c-format
+msgid " sender, receiver = client:port pair\n"
+msgstr " 送信, 受信 = クライアント:ポートの組\n"
+
+#: seq/aconnect/aconnect.c:54
+#, c-format
+msgid " -d,--disconnect disconnect\n"
+msgstr " -d,--disconnect 切り離し\n"
+
+#: seq/aconnect/aconnect.c:55
+#, c-format
+msgid " -e,--exclusive exclusive connection\n"
+msgstr " -e,--exclusive 排他接続\n"
+
+#: seq/aconnect/aconnect.c:56
+#, c-format
+msgid " -r,--real # convert real-time-stamp on queue\n"
+msgstr " -r,--real # キューのリアルタイムスタンプに変換\n"
+
+#: seq/aconnect/aconnect.c:57
+#, c-format
+msgid " -t,--tick # convert tick-time-stamp on queue\n"
+msgstr " -t,--tick # キューのティックタイムスタンプに変換\n"
+
+#: seq/aconnect/aconnect.c:58
+#, c-format
+msgid " * List connected ports (no subscription action)\n"
+msgstr " * 接続済みのポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:59
+#, c-format
+msgid " aconnect -i|-o [-options]\n"
+msgstr " aconnect -i|-o [-オプション]\n"
+
+#: seq/aconnect/aconnect.c:60
+#, c-format
+msgid " -i,--input list input (readable) ports\n"
+msgstr " -i,--input 入力 (読込) ポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:61
+#, c-format
+msgid " -o,--output list output (writable) ports\n"
+msgstr " -o,--output 主力 (書込) ポートの一覧\n"
+
+#: seq/aconnect/aconnect.c:62
+#, c-format
+msgid " -l,--list list current connections of each port\n"
+msgstr " -l,--list 各ポートの現在の接続を表示\n"
+
+#: seq/aconnect/aconnect.c:63
+#, c-format
+msgid " * Remove all exported connections\n"
+msgstr " * 全てのエクスポートされた接続を切り離す\n"
+
+#: seq/aconnect/aconnect.c:64
+#, c-format
+msgid " -x, --removeall\n"
+msgstr " -x, --removall\n"
+
+#: seq/aconnect/aconnect.c:131
+msgid "Connecting To"
+msgstr "接続先"
+
+#: seq/aconnect/aconnect.c:132
+msgid "Connected From"
+msgstr "接続元"
+
+#: seq/aconnect/aconnect.c:168
+#, c-format
+msgid "client %d: '%s' [type=%s]\n"
+msgstr "クライアント %d: '%s' [タイプ=%s]\n"
+
+#: seq/aconnect/aconnect.c:172
+msgid "user"
+msgstr "ユーザ"
+
+#: seq/aconnect/aconnect.c:172
+msgid "kernel"
+msgstr "カーネル"
+
+#: seq/aconnect/aconnect.c:323
+#, c-format
+msgid "can't open sequencer\n"
+msgstr "sequencer をオープンできません\n"
+
+#: seq/aconnect/aconnect.c:351
+#, c-format
+msgid "can't get client id\n"
+msgstr "クライアント ID を取得できません\n"
+
+#: seq/aconnect/aconnect.c:358
+#, c-format
+msgid "can't set client info\n"
+msgstr "クライアント情報を取得できません\n"
+
+#: seq/aconnect/aconnect.c:365
+#, c-format
+msgid "invalid sender address %s\n"
+msgstr "送信アドレスが不正です: %s\n"
+
+#: seq/aconnect/aconnect.c:370 seq/aseqnet/aseqnet.c:286
+#, c-format
+msgid "invalid destination address %s\n"
+msgstr "受信アドレスが不正です: %s\n"
+
+#: seq/aconnect/aconnect.c:384
+#, c-format
+msgid "No subscription is found\n"
+msgstr "接続が見つかりません\n"
+
+#: seq/aconnect/aconnect.c:389
+#, c-format
+msgid "Disconnection failed (%s)\n"
+msgstr "切り離しに失敗 (%s)\n"
+
+#: seq/aconnect/aconnect.c:395
+#, c-format
+msgid "Connection is already subscribed\n"
+msgstr "既に接続されています\n"
+
+#: seq/aconnect/aconnect.c:400
+#, c-format
+msgid "Connection failed (%s)\n"
+msgstr "接続に失敗 (%s)\n"
+
+#: seq/aseqnet/aseqnet.c:160
+#, c-format
+msgid "aseqnet - network client/server on ALSA sequencer\n"
+msgstr "aseqnet - ALSA sequencer 上のネットワーククライアント／サーバ"
+
+#: seq/aseqnet/aseqnet.c:161
+#, c-format
+msgid " Copyright (C) 1999 Takashi Iwai\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:162
+#, c-format
+msgid "usage:\n"
+msgstr "使用法:\n"
+
+#: seq/aseqnet/aseqnet.c:163
+#, c-format
+msgid " server mode: aseqnet [-options]\n"
+msgstr " サーバモード: aseqnet [-オプション]\n"
+
+#: seq/aseqnet/aseqnet.c:164
+#, c-format
+msgid " client mode: aseqnet [-options] server_host\n"
+msgstr " クライアントモード: aseqnet [-オプション] サーバホスト\n"
+
+#: seq/aseqnet/aseqnet.c:165
+#, c-format
+msgid "options:\n"
+msgstr "オプション:\n"
+
+#: seq/aseqnet/aseqnet.c:166
+#, c-format
+msgid " -p,--port # : sepcify TCP port (digit or service name)\n"
+msgstr " -p,--port # : TCP ポートの指定 (数字またはサービス名)\n"
+
+#: seq/aseqnet/aseqnet.c:167
+#, c-format
+msgid " -s,--source addr : read from given addr (client:port)\n"
+msgstr " -s,--source addr : 指定のアドレス(クライアント:ポート)から読み込む\n"
+
+#: seq/aseqnet/aseqnet.c:168
+#, c-format
+msgid " -d,--dest addr : write to given addr (client:port)\n"
+msgstr " -d,--dest addr : 指定のアドレス(クライアント:ポート)に書き込む\n"
+
+#: seq/aseqnet/aseqnet.c:169
+#, c-format
+msgid " -v, --verbose : print verbose messages\n"
+msgstr " -v,--verbose : 冗長メッセージ表示\n"
+
+#: seq/aseqnet/aseqnet.c:170
+#, c-format
+msgid " -i, --info : print certain received events\n"
+msgstr " -i,--info : 受信イベントを表示する\n"
+
+#: seq/aseqnet/aseqnet.c:184
+#, c-format
+msgid "can't malloc\n"
+msgstr "malloc できません"
+
+#: seq/aseqnet/aseqnet.c:209
+#, c-format
+msgid "closing files..\n"
+msgstr "ファイルを閉じます..\n"
+
+#: seq/aseqnet/aseqnet.c:268
+#, c-format
+msgid "sequencer opened: %d:%d\n"
+msgstr ""
+
+#: seq/aseqnet/aseqnet.c:275
+#, c-format
+msgid "invalid source address %s\n"
+msgstr "不正な送信アドレス %s\n"
+
+#: seq/aseqnet/aseqnet.c:305
+#, c-format
+msgid "service '%s' is not found in /etc/services\n"
+msgstr "サービス '%s' が /etc/services に見つかりません\n"
+
+#: seq/aseqnet/aseqnet.c:373
+#, c-format
+msgid "too many connections!\n"
+msgstr "接続が多すぎます!\n"
+
+#: seq/aseqnet/aseqnet.c:384
+#, c-format
+msgid "accepted[%d]\n"
+msgstr "了解[%d]\n"
+
+#: seq/aseqnet/aseqnet.c:407
+#, c-format
+msgid "can't get address %s\n"
+msgstr "アドレス %s を取得できません\n"
+
+#: seq/aseqnet/aseqnet.c:418
+#, c-format
+msgid "ok.. connected\n"
+msgstr "ok.. 接続\n"
+
+#: seq/aseqnet/aseqnet.c:514
+#, c-format
+msgid "Channel %2d: Control event : %5d\n"
+msgstr "チャネル %2d: コントロール : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:518
+#, c-format
+msgid "Channel %2d: Pitchbender : %5d\n"
+msgstr "チャネル %2d: ピッチベンド : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:522
+#, c-format
+msgid "Channel %2d: Note On event : %5d\n"
+msgstr "チャネル %2d: ノートオン : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:526
+#, c-format
+msgid "Channel %2d: Note Off event: %5d\n"
+msgstr "チャネル %2d: ノートオフ : %5d\n"
+
+#: seq/aseqnet/aseqnet.c:581
+#, c-format
+msgid "disconnected\n"
+msgstr "切り離し\n"
+
+#: speaker-test/speaker-test.c:71
+msgid "Front Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:72
+msgid "Front Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:73
+msgid "Rear Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:74
+msgid "Rear Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:75
+msgid "Center"
+msgstr ""
+
+#: speaker-test/speaker-test.c:76
+msgid "LFE"
+msgstr ""
+
+#: speaker-test/speaker-test.c:77
+msgid "Side Left"
+msgstr ""
+
+#: speaker-test/speaker-test.c:78
+msgid "Side Right"
+msgstr ""
+
+#: speaker-test/speaker-test.c:79
+msgid "8"
+msgstr ""
+
+#: speaker-test/speaker-test.c:80
+msgid "9"
+msgstr ""
+
+#: speaker-test/speaker-test.c:81
+msgid "10"
+msgstr ""
+
+#: speaker-test/speaker-test.c:82
+msgid "11"
+msgstr ""
+
+#: speaker-test/speaker-test.c:83
+msgid "12"
+msgstr ""
+
+#: speaker-test/speaker-test.c:84
+msgid "13"
+msgstr ""
+
+#: speaker-test/speaker-test.c:85
+msgid "14"
+msgstr ""
+
+#: speaker-test/speaker-test.c:86
+msgid "15"
+msgstr ""
+
+#: speaker-test/speaker-test.c:87
+msgid "16"
+msgstr ""
+
+#: speaker-test/speaker-test.c:237
+#, c-format
+msgid "Broken configuration for playback: no configurations available: %s\n"
+msgstr "再生用に設定できません: 設定がみつかりません: %s\n"
+
+#: speaker-test/speaker-test.c:244
+#, c-format
+msgid "Access type not available for playback: %s\n"
+msgstr "アクセスタイプが不正です: %s\n"
+
+#: speaker-test/speaker-test.c:251
+#, c-format
+msgid "Sample format not available for playback: %s\n"
+msgstr "指定のサンプルフォーマットを使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:258
+#, c-format
+msgid "Channels count (%i) not available for playbacks: %s\n"
+msgstr "チャネル数 (%i) を使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:266
+#, c-format
+msgid "Rate %iHz not available for playback: %s\n"
+msgstr "レート %iHz を使用できません: %s\n"
+
+#: speaker-test/speaker-test.c:271
+#, c-format
+msgid "Rate doesn't match (requested %iHz, get %iHz, err %d)\n"
+msgstr "設定レートが一致しません< (要求値 %iHz, 取得値 %iHz, エラー %d)\n"
+
+#: speaker-test/speaker-test.c:275
+#, c-format
+msgid "Rate set to %iHz (requested %iHz)\n"
+msgstr "レート %iHz (要求値 %iHz)\n"
+
+#: speaker-test/speaker-test.c:284
+#, c-format
+msgid "Buffer size range from %lu to %lu\n"
+msgstr "バッファサイズ範囲 %lu 〜 %lu\n"
+
+#: speaker-test/speaker-test.c:285
+#, c-format
+msgid "Period size range from %lu to %lu\n"
+msgstr "ピリオドサイズ範囲 %lu 〜 %lu\n"
+
+#: speaker-test/speaker-test.c:286
+#, c-format
+msgid "Periods = %d\n"
+msgstr "ピリオド数 = %d\n"
+
+#: speaker-test/speaker-test.c:287
+#, c-format
+msgid "Buffer time size %lu\n"
+msgstr "バッファタイムサイズ %lu\n"
+
+#: speaker-test/speaker-test.c:298
+#, c-format
+msgid "To choose buffer_size = %lu\n"
+msgstr "buffer_size = %lu を選択\n"
+
+#: speaker-test/speaker-test.c:299
+#, c-format
+msgid "To choose period_size = %lu\n"
+msgstr "period_size = %lu を選択\n"
+
+#: speaker-test/speaker-test.c:303
+#, c-format
+msgid "Unable to set period size %lu for playback: %s\n"
+msgstr "period_size %lu を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:308
+#, c-format
+msgid "Unable to get period size for playback: %s\n"
+msgstr "period_size を取得できません: %s\n"
+
+#: speaker-test/speaker-test.c:313
+#, c-format
+msgid "Unable to set buffer size %lu for playback: %s\n"
+msgstr "buffer_size %lu を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:317
+#, c-format
+msgid "was set period_size = %lu\n"
+msgstr "period_size = %lu で設定\n"
+
+#: speaker-test/speaker-test.c:318
+#, c-format
+msgid "was set buffer_size = %lu\n"
+msgstr "buffer_size = %lu で設定\n"
+
+#: speaker-test/speaker-test.c:320
+#, c-format
+msgid "buffer to small, could not use\n"
+msgstr "バッファが小さすぎます\n"
+
+#: speaker-test/speaker-test.c:328
+#, c-format
+msgid "Unable to set hw params for playback: %s\n"
+msgstr "hw params を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:341
+#, c-format
+msgid "Unable to determine current swparams for playback: %s\n"
+msgstr "現在の swparams を取得できません: %s\n"
+
+#: speaker-test/speaker-test.c:348
+#, c-format
+msgid "Unable to set start threshold mode for playback: %s\n"
+msgstr "start_threshold モードを設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:355
+#, c-format
+msgid "Unable to set avail min for playback: %s\n"
+msgstr "avail_min を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:362
+#, c-format
+msgid "Unable to set transfer align for playback: %s\n"
+msgstr "転送 align を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:369
+#, c-format
+msgid "Unable to set sw params for playback: %s\n"
+msgstr "再生用の sw params を設定できません: %s\n"
+
+#: speaker-test/speaker-test.c:384
+#, c-format
+msgid "Can't recovery from underrun, prepare failed: %s\n"
+msgstr "アンダーランから復帰失敗: %s\n"
+
+#: speaker-test/speaker-test.c:395
+#, c-format
+msgid "Can't recovery from suspend, prepare failed: %s\n"
+msgstr "サスペンドから復帰失敗: %s\n"
+
+#: speaker-test/speaker-test.c:431
+#, c-format
+msgid "Write error: %d,%s\n"
+msgstr "書込エラー: %d,%s\n"
+
+#: speaker-test/speaker-test.c:433
+#, c-format
+msgid "xrun_recovery failed: %d,%s\n"
+msgstr "xrun_recovery 失敗: %d,%s\n"
+
+#: speaker-test/speaker-test.c:452
+#, c-format
+msgid ""
+"Usage: speaker-test [OPTION]... \n"
+"-h,--help\thelp\n"
+"-D,--device\tplayback device\n"
+"-r,--rate\tstream rate in Hz\n"
+"-c,--channels\tcount of channels in stream\n"
+"-f,--frequency\tsine wave frequency in Hz\n"
+"-F,--format\tsample format\n"
+"-b,--buffer\tring buffer size in us\n"
+"-p,--period\tperiod size in us\n"
+"-t,--test\t1=use pink noise, 2=use sine wave\n"
+"-s,--speaker\tsingle speaker test. Values 1=Left or 2=right\n"
+"\n"
+msgstr ""
+"使用法: speaker-test [オプション]...\n"
+"-h,--help ヘルプ\n"
+"-D,--device 再生デバイス\n"
+"-r,--rate ストリームレート (Hz)\n"
+"-c,--channels チャネル数\n"
+"-f,--frequency 正弦波周波数 (hz)\n"
+"-F,--format サンプルフォーマット\n"
+"-b,--buffer リングバッファーサイズ (μs)\n"
+"-p,--period ピリオドサイズ (μs)\n"
+"-t,--test 1=ピンクノイズを使用, 2=正弦波を使用\n"
+"-s,--speaker 単一スピーカーテスト 1=左 または 2=右\n"
+"\n"
+
+#: speaker-test/speaker-test.c:561
+#, c-format
+msgid "Invalid parameter for -s option.\n"
+msgstr "-s オプションの値が不正です\n"
+
+#: speaker-test/speaker-test.c:566
+#, c-format
+msgid "Unknown option '%c'\n"
+msgstr "未知のオプション '%c'\n"
+
+#: speaker-test/speaker-test.c:579
+#, c-format
+msgid "Output failed: %s\n"
+msgstr "出力失敗: %s\n"
+
+#: speaker-test/speaker-test.c:583
+#, c-format
+msgid "Playback device is %s\n"
+msgstr "再生デバイス: %s\n"
+
+#: speaker-test/speaker-test.c:584
+#, c-format
+msgid "Stream parameters are %iHz, %s, %i channels\n"
+msgstr "ストリームパラメータ: %iHz, %s, %i チャネル\n"
+
+#: speaker-test/speaker-test.c:586
+#, c-format
+msgid "Using 16 octaves of pink noise\n"
+msgstr "16 オクターブのピンクノイズを使用\n"
+
+#: speaker-test/speaker-test.c:588
+#, c-format
+msgid "Sine wave rate is %.4fHz\n"
+msgstr "正弦波レート: %.4fHz\n"
+
+#: speaker-test/speaker-test.c:592
+#, c-format
+msgid "Playback open error: %d,%s\n"
+msgstr "再生オープンエラー: %d,%s\n"
+
+#: speaker-test/speaker-test.c:597
+#, c-format
+msgid "Setting of hwparams failed: %s\n"
+msgstr "hwparams の設定に失敗: %s\n"
+
+#: speaker-test/speaker-test.c:604
+#, c-format
+msgid "Setting of swparams failed: %s\n"
+msgstr "swparams の設定に失敗: %s\n"
+
+#: speaker-test/speaker-test.c:614
+#, c-format
+msgid "No enough memory\n"
+msgstr "メモリが足りません\n"
+
+#: speaker-test/speaker-test.c:638 speaker-test/speaker-test.c:660
+#, c-format
+msgid "Transfer failed: %s\n"
+msgstr "転送に失敗しました: %s\n"
+
+#: speaker-test/speaker-test.c:641
+#, c-format
+msgid "Pausing\n"
+msgstr "停止中\n"
+
+#: speaker-test/speaker-test.c:653
+#, c-format
+msgid "Time per period = %lf\n"
+msgstr "ピリオド時間 = %lf\n"
--- /dev/null
+s/"\([^"]*\)"/“\1”/g
+s/`\([^`']*\)'/‘\1’/g
+s/ '\([^`']*\)' / ‘\1’ /g
+s/ '\([^`']*\)'$/ ‘\1’/g
+s/^'\([^`']*\)' /‘\1’ /g
+s/“”/""/g
--- /dev/null
+/^"POT-Creation-Date: .*"$/{
+x
+s/P/P/
+ta
+g
+d
+bb
+:a
+x
+:b
+}
--- /dev/null
+# Sed script that remove the POT-Creation-Date line in the header entry
+# from a POT file.
+#
+# The distinction between the first and the following occurrences of the
+# pattern is achieved by looking at the hold space.
+/^"POT-Creation-Date: .*"$/{
+x
+# Test if the hold space is empty.
+s/P/P/
+ta
+# Yes it was empty. First occurrence. Remove the line.
+g
+d
+bb
+:a
+# The hold space was nonempty. Following occurrences. Do nothing.
+x
+:b
+}
INCLUDES = -I$(top_srcdir)/include
EXTRA_DIST = README.aconnect aconnect.1
+LDADD = $(LIBINTL)
bin_PROGRAMS = aconnect
aconnect_SOURCES = aconnect.c
#include <stdarg.h>
#include <sys/ioctl.h>
#include <alsa/asoundlib.h>
+#include "aconfig.h"
+#include "gettext.h"
static void error_handler(const char *file, int line, const char *function, int err, const char *fmt, ...)
{
static void usage(void)
{
- fprintf(stderr, "aconnect - ALSA sequencer connection manager\n");
- fprintf(stderr, "Copyright (C) 1999-2000 Takashi Iwai\n");
- fprintf(stderr, "Usage:\n");
- fprintf(stderr, " * Connection/disconnection between two ports\n");
- fprintf(stderr, " aconnect [-options] sender receiver\n");
- fprintf(stderr, " sender, receiver = client:port pair\n");
- fprintf(stderr, " -d,--disconnect disconnect\n");
- fprintf(stderr, " -e,--exclusive exclusive connection\n");
- fprintf(stderr, " -r,--real # convert real-time-stamp on queue\n");
- fprintf(stderr, " -t,--tick # convert tick-time-stamp on queue\n");
- fprintf(stderr, " * List connected ports (no subscription action)\n");
- fprintf(stderr, " aconnect -i|-o [-options]\n");
- fprintf(stderr, " -i,--input list input (readable) ports\n");
- fprintf(stderr, " -o,--output list output (writable) ports\n");
- fprintf(stderr, " -l,--list list current connections of each port\n");
- fprintf(stderr, " * Remove all exported connections\n");
- fprintf(stderr, " -x, --removeall\n");
+ fprintf(stderr, _("aconnect - ALSA sequencer connection manager\n"));
+ fprintf(stderr, _("Copyright (C) 1999-2000 Takashi Iwai\n"));
+ fprintf(stderr, _("Usage:\n"));
+ fprintf(stderr, _(" * Connection/disconnection between two ports\n"));
+ fprintf(stderr, _(" aconnect [-options] sender receiver\n"));
+ fprintf(stderr, _(" sender, receiver = client:port pair\n"));
+ fprintf(stderr, _(" -d,--disconnect disconnect\n"));
+ fprintf(stderr, _(" -e,--exclusive exclusive connection\n"));
+ fprintf(stderr, _(" -r,--real # convert real-time-stamp on queue\n"));
+ fprintf(stderr, _(" -t,--tick # convert tick-time-stamp on queue\n"));
+ fprintf(stderr, _(" * List connected ports (no subscription action)\n"));
+ fprintf(stderr, _(" aconnect -i|-o [-options]\n"));
+ fprintf(stderr, _(" -i,--input list input (readable) ports\n"));
+ fprintf(stderr, _(" -o,--output list output (writable) ports\n"));
+ fprintf(stderr, _(" -l,--list list current connections of each port\n"));
+ fprintf(stderr, _(" * Remove all exported connections\n"));
+ fprintf(stderr, _(" -x, --removeall\n"));
}
/*
snd_seq_query_subscribe_t *subs;
snd_seq_query_subscribe_alloca(&subs);
snd_seq_query_subscribe_set_root(subs, addr);
- list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_READ, "Connecting To");
- list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_WRITE, "Connected From");
+ list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_READ, _("Connecting To"));
+ list_each_subs(seq, subs, SND_SEQ_QUERY_SUBS_WRITE, _("Connected From"));
}
/*
snd_seq_port_info_t *pinfo, int count)
{
if (! count) {
- printf("client %d: '%s' [type=%s]\n",
+ printf(_("client %d: '%s' [type=%s]\n"),
snd_seq_client_info_get_client(cinfo),
snd_seq_client_info_get_name(cinfo),
- (snd_seq_client_info_get_type(cinfo) == SND_SEQ_USER_CLIENT ? "user" : "kernel"));
+ (snd_seq_client_info_get_type(cinfo) == SND_SEQ_USER_CLIENT ?
+ _("user") : _("kernel")));
}
printf(" %3d '%-16s'\n",
snd_seq_port_info_get_port(pinfo),
snd_seq_port_subscribe_t *subs;
snd_seq_addr_t sender, dest;
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+
while ((c = getopt_long(argc, argv, "dior:t:elx", long_option, NULL)) != -1) {
switch (c) {
case 'd':
}
if (snd_seq_open(&seq, "default", SND_SEQ_OPEN_DUPLEX, 0) < 0) {
- fprintf(stderr, "can't open sequencer\n");
+ fprintf(stderr, _("can't open sequencer\n"));
return 1;
}
if ((client = snd_seq_client_id(seq)) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "can't get client id\n");
+ fprintf(stderr, _("can't get client id\n"));
return 1;
}
/* set client info */
if (snd_seq_set_client_name(seq, "ALSA Connector") < 0) {
snd_seq_close(seq);
- fprintf(stderr, "can't set client info\n");
+ fprintf(stderr, _("can't set client info\n"));
return 1;
}
/* set subscription */
if (snd_seq_parse_address(seq, &sender, argv[optind]) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "invalid sender address %s\n", argv[optind]);
+ fprintf(stderr, _("invalid sender address %s\n"), argv[optind]);
return 1;
}
if (snd_seq_parse_address(seq, &dest, argv[optind + 1]) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "invalid destination address %s\n", argv[optind + 1]);
+ fprintf(stderr, _("invalid destination address %s\n"), argv[optind + 1]);
return 1;
}
snd_seq_port_subscribe_alloca(&subs);
if (command == UNSUBSCRIBE) {
if (snd_seq_get_port_subscription(seq, subs) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "No subscription is found\n");
+ fprintf(stderr, _("No subscription is found\n"));
return 1;
}
if (snd_seq_unsubscribe_port(seq, subs) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "Disconnection failed (%s)\n", snd_strerror(errno));
+ fprintf(stderr, _("Disconnection failed (%s)\n"), snd_strerror(errno));
return 1;
}
} else {
if (snd_seq_get_port_subscription(seq, subs) == 0) {
snd_seq_close(seq);
- fprintf(stderr, "Connection is already subscribed\n");
+ fprintf(stderr, _("Connection is already subscribed\n"));
return 1;
}
if (snd_seq_subscribe_port(seq, subs) < 0) {
snd_seq_close(seq);
- fprintf(stderr, "Connection failed (%s)\n", snd_strerror(errno));
+ fprintf(stderr, _("Connection failed (%s)\n"), snd_strerror(errno));
return 1;
}
}
break;
case SND_SEQ_EVENT_TUNE_REQUEST:
/* something's fishy here ... */
- printf("Tuna request\n");
+ printf("Tune request\n");
break;
case SND_SEQ_EVENT_RESET:
printf("Reset\n");
#include <alsa/asoundlib.h>
#include <getopt.h>
#include <signal.h>
+#include "aconfig.h"
+#include "gettext.h"
/*
* prototypes
int port = DEFAULT_PORT;
char *source = NULL, *dest = NULL;
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+
while ((c = getopt_long(argc, argv, "p:s:d:vi", long_option, NULL)) != -1) {
switch (c) {
case 'p':
*/
static void usage(void)
{
- fprintf(stderr, "aseqnet - network client/server on ALSA sequencer\n");
- fprintf(stderr, " Copyright (C) 1999 Takashi Iwai\n");
- fprintf(stderr, "usage:\n");
- fprintf(stderr, " server mode: aseqnet [-options]\n");
- fprintf(stderr, " client mode: aseqnet [-options] server_host\n");
- fprintf(stderr, "options:\n");
- fprintf(stderr, " -p,--port # : sepcify TCP port (digit or service name)\n");
- fprintf(stderr, " -s,--source addr : read from given addr (client:port)\n");
- fprintf(stderr, " -d,--dest addr : write to given addr (client:port)\n");
- fprintf(stderr, " -v, --verbose : print verbose messages\n");
- fprintf(stderr, " -i, --info : print certain received events\n");
+ fprintf(stderr, _("aseqnet - network client/server on ALSA sequencer\n"));
+ fprintf(stderr, _(" Copyright (C) 1999 Takashi Iwai\n"));
+ fprintf(stderr, _("usage:\n"));
+ fprintf(stderr, _(" server mode: aseqnet [-options]\n"));
+ fprintf(stderr, _(" client mode: aseqnet [-options] server_host\n"));
+ fprintf(stderr, _("options:\n"));
+ fprintf(stderr, _(" -p,--port # : sepcify TCP port (digit or service name)\n"));
+ fprintf(stderr, _(" -s,--source addr : read from given addr (client:port)\n"));
+ fprintf(stderr, _(" -d,--dest addr : write to given addr (client:port)\n"));
+ fprintf(stderr, _(" -v, --verbose : print verbose messages\n"));
+ fprintf(stderr, _(" -i, --info : print certain received events\n"));
}
writebuf = malloc(max_wrlen);
readbuf = malloc(max_rdlen);
if (writebuf == NULL || readbuf == NULL) {
- fprintf(stderr, "can't malloc\n");
+ fprintf(stderr, _("can't malloc\n"));
exit(1);
}
memset(writebuf, 0, max_wrlen);
{
int i;
if (verbose)
- fprintf(stderr, "closing files..\n");
+ fprintf(stderr, _("closing files..\n"));
for (i = 0; i < max_connection; i++) {
if (netfd[i] >= 0)
close(netfd[i]);
exit(1);
}
if (verbose)
- fprintf(stderr, "sequencer opened: %d:%d\n",
+ fprintf(stderr, _("sequencer opened: %d:%d\n"),
snd_seq_client_id(handle), seq_port);
/* explicit subscriptions */
if (source) {
/* read subscription */
if (snd_seq_parse_address(handle, &addr, source) < 0) {
- fprintf(stderr, "invalid source address %s\n", source);
+ fprintf(stderr, _("invalid source address %s\n"), source);
exit(1);
}
if (snd_seq_connect_from(handle, seq_port, addr.client, addr.port)) {
if (dest) {
/* write subscription */
if (snd_seq_parse_address(handle, &addr, dest) < 0) {
- fprintf(stderr, "invalid destination address %s\n", dest);
+ fprintf(stderr, _("invalid destination address %s\n"), dest);
exit(1);
}
if (snd_seq_connect_to(handle, seq_port, addr.client, addr.port)) {
struct servent *sp;
if ((sp = getservbyname(service, "tcp")) == NULL){
- fprintf(stderr, "service '%s' is not found in /etc/services\n", service);
+ fprintf(stderr, _("service '%s' is not found in /etc/services\n"), service);
return -1;
}
return sp->s_port;
break;
}
if (i >= max_connection) {
- fprintf(stderr, "too many connections!\n");
+ fprintf(stderr, _("too many connections!\n"));
exit(1);
}
memset(&addr, 0, sizeof(addr));
exit(1);
}
if (verbose)
- fprintf(stderr, "accepted[%d]\n", netfd[i]);
+ fprintf(stderr, _("accepted[%d]\n"), netfd[i]);
cur_connected++;
}
exit(1);
}
if ((host = gethostbyname(server)) == NULL){
- fprintf(stderr,"can't get address %s\n", server);
+ fprintf(stderr, _("can't get address %s\n"), server);
exit(1);
}
addr.sin_port = htons(port);
exit(1);
}
if (verbose)
- fprintf(stderr, "ok.. connected\n");
+ fprintf(stderr, _("ok.. connected\n"));
netfd[0] = fd;
cur_connected = 1;
}
{
switch (ev->type) {
case SND_SEQ_EVENT_CONTROLLER:
- printf("Channel %2d: Control event : %5d\n",
+ printf(_("Channel %2d: Control event : %5d\n"),
ev->data.control.channel, ev->data.control.value);
break;
case SND_SEQ_EVENT_PITCHBEND:
- printf("Channel %2d: Pitchbender : %5d\n",
+ printf(_("Channel %2d: Pitchbender : %5d\n"),
ev->data.control.channel, ev->data.control.value);
break;
case SND_SEQ_EVENT_NOTEON:
- printf("Channel %2d: Note On event : %5d\n",
+ printf(_("Channel %2d: Note On event : %5d\n"),
ev->data.control.channel, ev->data.note.note);
- break;
+ break;
case SND_SEQ_EVENT_NOTEOFF:
- printf("Channel %2d: Note Off event: %5d\n",
- ev->data.control.channel, ev->data.note.note);
- break;
+ printf(_("Channel %2d: Note Off event: %5d\n"),
+ ev->data.control.channel, ev->data.note.note);
+ break;
}
}
if (count == 0) {
if (verbose)
- fprintf(stderr, "disconnected\n");
+ fprintf(stderr, _("disconnected\n"));
return 1;
}
SPEAKER_TEST_VERSION = 0.0.8
-INCLUDES = -I$(top_srcdir)/include -DVERSION=\"$(SPEAKER_TEST_VERSION)\"
+INCLUDES = -I$(top_srcdir)/include -DSPEAKER_TEST_VERSION=\"$(SPEAKER_TEST_VERSION)\"
SUBDIRS= samples
+LDADD = $(LIBINTL)
bin_PROGRAMS = speaker-test
speaker_test_SOURCES = speaker-test.c pink.c
#include <getopt.h>
#include <inttypes.h>
-/* #include "aconfig.h" */
-
#define ALSA_PCM_NEW_HW_PARAMS_API
#define ALSA_PCM_NEW_SW_PARAMS_API
#include <alsa/asoundlib.h>
#include <sys/time.h>
#include <math.h>
#include "pink.h"
+#include "aconfig.h"
+#include "gettext.h"
static char *device = "plughw:0,0"; /* playback device */
static snd_pcm_format_t format = SND_PCM_FORMAT_S16; /* sample format */
static snd_pcm_uframes_t buffer_size;
static snd_pcm_uframes_t period_size;
static const char *channel_name[] = {
- "Front Left" ,
- "Front Right" ,
- "Rear Left" ,
- "Rear Right" ,
- "Center" ,
- "LFE",
- "Side Left",
- "Side Right",
- "8",
- "9",
- "10",
- "11",
- "12",
- "13",
- "14",
- "15",
- "16"
+ N_("Front Left"),
+ N_("Front Right"),
+ N_("Rear Left"),
+ N_("Rear Right"),
+ N_("Center"),
+ N_("LFE"),
+ N_("Side Left"),
+ N_("Side Right"),
+ N_("8"),
+ N_("9"),
+ N_("10"),
+ N_("11"),
+ N_("12"),
+ N_("13"),
+ N_("14"),
+ N_("15"),
+ N_("16")
};
static const int channels4[] = {
/* choose all parameters */
err = snd_pcm_hw_params_any(handle, params);
if (err < 0) {
- printf("Broken configuration for playback: no configurations available: %s\n", snd_strerror(err));
+ printf(_("Broken configuration for playback: no configurations available: %s\n"), snd_strerror(err));
return err;
}
/* set the interleaved read/write format */
err = snd_pcm_hw_params_set_access(handle, params, access);
if (err < 0) {
- printf("Access type not available for playback: %s\n", snd_strerror(err));
+ printf(_("Access type not available for playback: %s\n"), snd_strerror(err));
return err;
}
/* set the sample format */
err = snd_pcm_hw_params_set_format(handle, params, format);
if (err < 0) {
- printf("Sample format not available for playback: %s\n", snd_strerror(err));
+ printf(_("Sample format not available for playback: %s\n"), snd_strerror(err));
return err;
}
/* set the count of channels */
err = snd_pcm_hw_params_set_channels(handle, params, channels);
if (err < 0) {
- printf("Channels count (%i) not available for playbacks: %s\n", channels, snd_strerror(err));
+ printf(_("Channels count (%i) not available for playbacks: %s\n"), channels, snd_strerror(err));
return err;
}
rrate = rate;
err = snd_pcm_hw_params_set_rate(handle, params, rate, 0);
if (err < 0) {
- printf("Rate %iHz not available for playback: %s\n", rate, snd_strerror(err));
+ printf(_("Rate %iHz not available for playback: %s\n"), rate, snd_strerror(err));
return err;
}
if (rrate != rate) {
- printf("Rate doesn't match (requested %iHz, get %iHz, err %d)\n", rate, rrate, err);
+ printf(_("Rate doesn't match (requested %iHz, get %iHz, err %d)\n"), rate, rrate, err);
return -EINVAL;
}
- printf("Rate set to %iHz (requested %iHz)\n", rrate, rate);
+ printf(_("Rate set to %iHz (requested %iHz)\n"), rrate, rate);
/* set the buffer time */
buffer_time_to_size = ( (snd_pcm_uframes_t)buffer_time * rate) / 1000000;
err = snd_pcm_hw_params_get_buffer_size_min(params, &buffer_size_min);
err = snd_pcm_hw_params_get_period_size_min(params, &period_size_min,&dir);
dir=0;
err = snd_pcm_hw_params_get_period_size_max(params, &period_size_max,&dir);
- printf("Buffer size range from %lu to %lu\n",buffer_size_min, buffer_size_max);
- printf("Period size range from %lu to %lu\n",period_size_min, period_size_max);
- printf("Periods = %d\n", PERIODS);
- printf("Buffer time size %lu\n",buffer_time_to_size);
+ printf(_("Buffer size range from %lu to %lu\n"),buffer_size_min, buffer_size_max);
+ printf(_("Period size range from %lu to %lu\n"),period_size_min, period_size_max);
+ printf(_("Periods = %d\n"), PERIODS);
+ printf(_("Buffer time size %lu\n"),buffer_time_to_size);
buffer_size = buffer_time_to_size;
//buffer_size=8096;
period_size = buffer_size/PERIODS;
buffer_size = period_size*PERIODS;
//period_size = 510;
- printf("To choose buffer_size = %lu\n",buffer_size);
- printf("To choose period_size = %lu\n",period_size);
+ printf(_("To choose buffer_size = %lu\n"),buffer_size);
+ printf(_("To choose period_size = %lu\n"),period_size);
dir=0;
err = snd_pcm_hw_params_set_period_size_near(handle, params, &period_size, &dir);
if (err < 0) {
- printf("Unable to set period size %lu for playback: %s\n", period_size, snd_strerror(err));
+ printf(_("Unable to set period size %lu for playback: %s\n"), period_size, snd_strerror(err));
return err;
}
dir=0;
err = snd_pcm_hw_params_get_period_size(params, &period_size, &dir);
- if (err < 0) printf("Unable to get period size for playback: %s\n", snd_strerror(err));
+ if (err < 0) printf(_("Unable to get period size for playback: %s\n"), snd_strerror(err));
dir=0;
err = snd_pcm_hw_params_set_buffer_size_near(handle, params, &buffer_size);
if (err < 0) {
- printf("Unable to set buffer size %lu for playback: %s\n", buffer_size, snd_strerror(err));
+ printf(_("Unable to set buffer size %lu for playback: %s\n"), buffer_size, snd_strerror(err));
return err;
}
err = snd_pcm_hw_params_get_buffer_size(params, &buffer_size);
- printf("was set period_size = %lu\n",period_size);
- printf("was set buffer_size = %lu\n",buffer_size);
+ printf(_("was set period_size = %lu\n"),period_size);
+ printf(_("was set buffer_size = %lu\n"),buffer_size);
if (2*period_size > buffer_size) {
- printf("buffer to small, could not use\n");
+ printf(_("buffer to small, could not use\n"));
return err;
}
/* write the parameters to device */
err = snd_pcm_hw_params(handle, params);
if (err < 0) {
- printf("Unable to set hw params for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to set hw params for playback: %s\n"), snd_strerror(err));
return err;
}
/* get the current swparams */
err = snd_pcm_sw_params_current(handle, swparams);
if (err < 0) {
- printf("Unable to determine current swparams for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to determine current swparams for playback: %s\n"), snd_strerror(err));
return err;
}
/* start the transfer when a buffer is full */
err = snd_pcm_sw_params_set_start_threshold(handle, swparams, buffer_size);
if (err < 0) {
- printf("Unable to set start threshold mode for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to set start threshold mode for playback: %s\n"), snd_strerror(err));
return err;
}
/* allow the transfer when at least period_size frames can be processed */
err = snd_pcm_sw_params_set_avail_min(handle, swparams, period_size);
if (err < 0) {
- printf("Unable to set avail min for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to set avail min for playback: %s\n"), snd_strerror(err));
return err;
}
/* align all transfers to 1 sample */
err = snd_pcm_sw_params_set_xfer_align(handle, swparams, 1);
if (err < 0) {
- printf("Unable to set transfer align for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to set transfer align for playback: %s\n"), snd_strerror(err));
return err;
}
/* write the parameters to the playback device */
err = snd_pcm_sw_params(handle, swparams);
if (err < 0) {
- printf("Unable to set sw params for playback: %s\n", snd_strerror(err));
+ printf(_("Unable to set sw params for playback: %s\n"), snd_strerror(err));
return err;
}
if (err == -EPIPE) { /* under-run */
err = snd_pcm_prepare(handle);
if (err < 0)
- printf("Can't recovery from underrun, prepare failed: %s\n", snd_strerror(err));
+ printf(_("Can't recovery from underrun, prepare failed: %s\n"), snd_strerror(err));
return 0;
}
else if (err == -ESTRPIPE) {
if (err < 0) {
err = snd_pcm_prepare(handle);
if (err < 0)
- printf("Can't recovery from suspend, prepare failed: %s\n", snd_strerror(err));
+ printf(_("Can't recovery from suspend, prepare failed: %s\n"), snd_strerror(err));
}
return 0;
continue;
if (err < 0) {
- printf("Write error: %d,%s\n", err, snd_strerror(err));
+ printf(_("Write error: %d,%s\n"), err, snd_strerror(err));
if (xrun_recovery(handle, err) < 0) {
- printf("xrun_recovery failed: %d,%s\n", err, snd_strerror(err));
+ printf(_("xrun_recovery failed: %d,%s\n"), err, snd_strerror(err));
return -1;
}
break; /* skip one period */
int k;
printf(
- "Usage: speaker-test [OPTION]... \n"
- "-h,--help help\n"
- "-D,--device playback device\n"
- "-r,--rate stream rate in Hz\n"
- "-c,--channels count of channels in stream\n"
- "-f,--frequency sine wave frequency in Hz\n"
- "-F,--format sample format\n"
- "-b,--buffer ring buffer size in us\n"
- "-p,--period period size in us\n"
- "-t,--test 1=use pink noise, 2=use sine wave\n"
- "-s,--speaker single speaker test. Values 1=Left or 2=right\n"
- "\n");
+ _("Usage: speaker-test [OPTION]... \n"
+ "-h,--help help\n"
+ "-D,--device playback device\n"
+ "-r,--rate stream rate in Hz\n"
+ "-c,--channels count of channels in stream\n"
+ "-f,--frequency sine wave frequency in Hz\n"
+ "-F,--format sample format\n"
+ "-b,--buffer ring buffer size in us\n"
+ "-p,--period period size in us\n"
+ "-t,--test 1=use pink noise, 2=use sine wave\n"
+ "-s,--speaker single speaker test. Values 1=Left or 2=right\n"
+ "\n"));
#if 1
- printf("Recognized sample formats are:");
+ printf(_("Recognized sample formats are:"));
for (k = 0; k < SND_PCM_FORMAT_LAST; ++k) {
const char *s = snd_pcm_format_name(k);
if (s)
{NULL, 0, NULL, 0 },
};
+ setlocale(LC_ALL, "");
+ textdomain(PACKAGE);
+
snd_pcm_hw_params_alloca(&hwparams);
snd_pcm_sw_params_alloca(&swparams);
morehelp = 0;
- printf("\nspeaker-test %s\n\n",VERSION);
+ printf("\nspeaker-test %s\n\n", SPEAKER_TEST_VERSION);
while (1) {
int c;
speaker = speaker < 1 ? 0 : speaker;
speaker = speaker > channels ? 0 : speaker;
if (speaker==0) {
- printf("Invalid parameter for -s option.\n");
+ printf(_("Invalid parameter for -s option.\n"));
exit(EXIT_FAILURE);
}
break;
default:
- printf("Unknown option '%c'\n", c);
+ printf(_("Unknown option '%c'\n"), c);
exit(EXIT_FAILURE);
break;
}
err = snd_output_stdio_attach(&output, stdout, 0);
if (err < 0) {
- printf("Output failed: %s\n", snd_strerror(err));
+ printf(_("Output failed: %s\n"), snd_strerror(err));
exit(EXIT_FAILURE);
}
- printf("Playback device is %s\n", device);
- printf("Stream parameters are %iHz, %s, %i channels\n", rate, snd_pcm_format_name(format), channels);
+ printf(_("Playback device is %s\n"), device);
+ printf(_("Stream parameters are %iHz, %s, %i channels\n"), rate, snd_pcm_format_name(format), channels);
if(test_type==1)
- printf("Using 16 octaves of pink noise\n");
+ printf(_("Using 16 octaves of pink noise\n"));
else
- printf("Sine wave rate is %.4fHz\n", freq);
+ printf(_("Sine wave rate is %.4fHz\n"), freq);
loop:
while ((err = snd_pcm_open(&handle, device, SND_PCM_STREAM_PLAYBACK, 0)) < 0) {
- printf("Playback open error: %d,%s\n", err,snd_strerror(err));
+ printf(_("Playback open error: %d,%s\n"), err,snd_strerror(err));
sleep(1);
}
if ((err = set_hwparams(handle, hwparams, SND_PCM_ACCESS_RW_INTERLEAVED)) < 0) {
- printf("Setting of hwparams failed: %s\n", snd_strerror(err));
+ printf(_("Setting of hwparams failed: %s\n"), snd_strerror(err));
snd_pcm_close(handle);
goto loop;
exit(EXIT_FAILURE);
}
//getchar();
if ((err = set_swparams(handle, swparams)) < 0) {
- printf("Setting of swparams failed: %s\n", snd_strerror(err));
+ printf(_("Setting of swparams failed: %s\n"), snd_strerror(err));
snd_pcm_close(handle);
goto loop;
exit(EXIT_FAILURE);
initialize_pink_noise( &pink, 16);
if (frames == NULL) {
- printf("No enough memory\n");
+ printf(_("No enough memory\n"));
exit(EXIT_FAILURE);
}
if (speaker==0) {
if (channels == 8) {
channel=channels8[chn];
}
- printf(" %d - %s\n", channel, channel_name[channel]);
+ printf(" %d - %s\n", channel, gettext(channel_name[channel]));
err = write_loop(handle, channel, ((rate*3)/period_size), frames);
//err = write_loop(handle, 255, ((rate*3)/period_size), frames);
if (err < 0) {
- printf("Transfer failed: %s\n", snd_strerror(err));
+ printf(_("Transfer failed: %s\n"), snd_strerror(err));
free(frames);
snd_pcm_close(handle);
- printf("Pausing\n");
+ printf(_("Pausing\n"));
goto loop ;
//pause();
//printf("Done Pausing\n");
time1 = (double)tv1.tv_sec + ((double)tv1.tv_usec / 1000000.0);
time2 = (double)tv2.tv_sec + ((double)tv2.tv_usec / 1000000.0);
time3 = time2 - time1;
- printf("Time per period = %lf\n", time3 );
+ printf(_("Time per period = %lf\n"), time3 );
}
} else {
- printf(" - %s\n", channel_name[speaker-1]);
+ printf(" - %s\n", gettext(channel_name[speaker-1]));
err = write_loop(handle, speaker-1, ((rate*5)/period_size), frames);
if (err < 0) {
- printf("Transfer failed: %s\n", snd_strerror(err));
+ printf(_("Transfer failed: %s\n"), snd_strerror(err));
}
}
git://git.alsa-project.org / alsa-utils.git / commitdiff