#!/bin/sh
#
-# Copyright (c) 2004 Mikael Magnusson <mikma@users.sourceforge.net>
+# Copyright (c) 2004-2005 Mikael Magnusson <mikma@users.sourceforge.net>
#
-LO10K1=@bindir@/lo10k1
+bindir=@bindir@
+LO10K1=${bindir}/lo10k1
+
+## Default configuration
+#
+DECODER=SIMPLE51
+#DECODER=PROLOGIC
+#DECODER=BOTH
+
+# Inputs
+FXIN_PCM_89=1
+EXTIN_AC97=1
+EXTIN_SPDIF_CD=1
+#EXTIN_ZOOM=1
+#EXTIN_TOSLINK=1
+#EXTIN_LINE1=1
+#EXTIN_COAX_SPDIF=1
+#EXTIN_LINE2=1
+
+# Outputs
+EXTOUT_ANALOG_FRONT=1
+EXTOUT_ANALOG_REAR=1
+EXTOUT_ANALOG_CENTER=1
+EXTOUT_ANALOG_LFE=1
+#EXTOUT_IEC958=1
+#EXTOUT_REAR=1
+#EXTOUT_CENTER=1
+#EXTOUT_LFE=1
+EXTOUT_HEADPHONE=1
+
+if [ -r /etc/default/ld10k1 ]; then
+ . /etc/default/ld10k1
+fi
#LO10K1="valgrind --num-callers=6 ../lo10k1"
DEBUG=0
-function runlo10k1
+std_playback=playback
+#std_playback=playback_noswitch
+std_capture=capture
+#std_capture=capture_noswitch
+
+function log
{
- if test $DEBUG -gt 2 ; then
- echo $LO10K1 "$@"
+ local level=$1
+
+ shift
+
+ if [ $DEBUG -gt $level ]; then
+ echo "$@"
fi
+}
+
+function runlo10k1
+{
+ log 2 $LO10K1 "$@"
$LO10K1 "$@"
res=$?
-
- if test $res -ne 0 ; then
+ if [ $res -ne 0 ]; then
echo Failed $LO10K1 "$@"
+ exit 1
fi
}
+function rename
+{
+ port=$1
+ name=$2
+
+ log 1 "rename $port = $name"
+
+ runlo10k1 --renam "$port=$name"
+}
+
function connect
{
from=$1
op=$2
to=$3
- if test $DEBUG -gt 1 ; then
- echo "connect $from $op $to"
- fi
+ log 1 "connect $from $op $to"
runlo10k1 --conadd "$from$op$to"
}
local name=$1
local port=$2
- if test $DEBUG -gt 0 ; then
- echo "copy \"$name\" $port"
- fi
+ log 0 "copy \"$name\" $port"
# Copy
runlo10k1 -n --patch_name "$name Copy" -a copy_2.emu10k1
local name=$1
local port=$2
local default=$3
+ local index=${4:-0}
- if test $DEBUG -gt 1 ; then
- echo "volume \"$name\" $port default=$default"
- fi
+ log 1 "volume \"$name\" $port default=$default"
# Volume
- runlo10k1 -n --ctrl "c-Left,Right:$name Volume,t-$name Volume:1,s-$name Volume:$default" --patch_name "$name Volume" -a vol_2.emu10k1
+ runlo10k1 -n --ctrl "c-Left,Right:$name Volume,t-$name Volume:1,s-$name Volume:$default,i-$name Volume:${index}" --patch_name "$name Volume" -a vol_2.emu10k1
# Input
connect "PIN($name Volume)" '=' "$port"
}
local name=$1
local port=$2
local default=$3
+ local index=$4
- if test $DEBUG -gt 1 ; then
- echo "master volume \"$name\" $port default=$default"
- fi
+ log 1 "master volume \"$name\" $port default=$default"
# Master
- runlo10k1 -n --ctrl "c-VolM:$name Volume,t-$name Volume:1,s-$name Volume:$default" --patch_name "$name Volume" -a vol_master.emu10k1
+ runlo10k1 -n --ctrl "c-VolM:$name Volume,t-$name Volume:1,s-$name Volume:$default,i-$name Volume:$index" --patch_name "$name Volume" -a vol_master.emu10k1
# Input
connect "$port" '=' "PIN($name Volume)"
}
local port=$2
local default=$3
- if test $DEBUG -gt 1 ; then
- echo "switch \"$name\" $port default=$default"
- fi
+ log 1 "switch \"$name\" $port default=$default"
# Switch
- runlo10k1 -n --ctrl "c-switchL,switchR:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_2.emu10k1
+ #runlo10k1 -n --ctrl "c-switchL,switchR:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_2.emu10k1
+ runlo10k1 -n --ctrl "c-switch:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a mono_switch_2.emu10k1
# Input
connect "PIN($name Switch)" '>' "$port"
}
+function switch_2x2
+{
+ local name=$1
+ local port1=$2
+ local port2=$3
+ local default=$4
+
+ log 1 "switch 2x2 \"$name\" $port1 $port2 default=$default"
+
+ # Switch
+ runlo10k1 -n --ctrl "c-switchL,switchR:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_2x2.emu10k1
+ # Input
+ connect "PIN($name Switch,0,1)" '>' "$port1"
+ connect "PIN($name Switch,2,3)" '>' "$port2"
+}
+
+function switch_5x2
+{
+ local name=$1
+ local port1=$2
+ local port2=$3
+ local default=$4
+
+ log 1 "switch 5x2 \"$name\" $port1 $port2 default=$default"
+
+ # Switch
+ runlo10k1 -n --ctrl "c-switch:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_5x2.emu10k1
+ # Input
+ connect "PIN($name Switch,0,1,2,3,4)" '>' "$port1"
+ connect "PIN($name Switch,5,6,7,8,9)" '>' "$port2"
+}
+
function master_switch
{
local name=$1
local port=$2
local default=$3
+ local index=$4
- if test $DEBUG -gt 1 ; then
- echo "master_switch \"$name\" $port default=$default"
- fi
+ log 1 "master_switch \"$name\" $port default=$default"
# Master switch
- runlo10k1 -n --ctrl "c-switch:$name Switch,t-$name Switch:4,s-$name Switch:$default" --patch_name "$name Switch" -a switch_6.emu10k1
+ runlo10k1 -n --ctrl "c-switch:$name Switch,t-$name Switch:4,s-$name Switch:$default,i-$name Switch:$index" --patch_name "$name Switch" -a switch_6.emu10k1
# Input
connect "PIN($name Switch)" '=' "$port"
}
name=$1
port=$2
- if test $DEBUG -gt 0 ; then
- echo "playback \"$name\" $port"
- fi
+ log 0 "playback \"$name\" $port"
# Switch
switch "$name Playback" "$port" "1#1"
volume "$name Playback" "POUT($name Playback Switch)" "0#0"
# Output
- connect "POUT($name Playback Volume)" '>' "PIN(Wave Stereo To 51,0,1)"
+ add_output "POUT($name Playback Volume)"
}
function playback_noswitch
name=$1
port=$2
- if test $DEBUG -gt 0 ; then
- echo "playback_noswitch \"$name\" $port"
- fi
+ log 0 "playback_noswitch \"$name\" $port"
# Switch
volume "$name Playback" "$port" "0#0"
# Output
- connect "POUT($name Playback Volume)" '>' "PIN(Wave Stereo To 51,0,1)"
+ add_output "POUT($name Playback Volume)"
}
function capture
name=$1
port=$2
- if test $DEBUG -gt 0 ; then
- echo "capture \"$name\" $port"
- fi
+ log 0 "capture \"$name\" $port"
# Capture switch
switch "$name Capture" "$port" "0#0"
name=$1
port=$2
- if test $DEBUG -gt 0 ; then
- echo "capture_noswitch \"$name\" $port"
- fi
+ log 0 "capture_noswitch \"$name\" $port"
# Capture switch
volume "$name Capture" "$port" "100#100"
{
local name=$1
local port=$2
+ local index=$3
- if test $DEBUG -gt 0 ; then
- echo "master \"$name\" $port"
- fi
+ log 0 "master \"$name\" $port"
# Switch
- master_volume "$name Playback" "$port" "100"
- master_switch "$name Playback" "POUT($name Playback Volume)" "1"
+ master_volume "$name Playback" "$port" 100 $index
+ master_switch "$name Playback" "POUT($name Playback Volume)" 1 $index
}
function dump_patches
exit
}
-
-function simple_stereo_to_51
+function add_output
{
- local name=$1
- local port=$2
+ local port=$1
- if test $DEBUG -gt 1 ; then
- echo "simple_stereo_to_51 \"$name\" $port"
- fi
+ $add_output_func "$port"
+}
-# Stereo to 5.1
- runlo10k1 -n --ctrl "c-Left,Right:$name Playback Volume,t-$name Playback Volume:1,s-$name Playback Volume:100#100,c-LeftSurr,RightSurr:$name Surround Playback Volume,t-$name Surround Playback Volume:1,c-Center:$name Center Playback Volume,t-$name Center Playback Volume:1,c-LFE:$name LFE Playback Volume,t-$name LFE Playback Volume:1" --patch_name "$name Stereo To 51" -a sto51.emu10k1
-# Input
- connect "$port" '>' "PIN($name Stereo To 51,0,1)"
+function add_output_tone_2
+{
+ local port=$1
-# Output
- connect "POUT($name Stereo To 51,0,1,2,3,4)" '>' "PIN(Tone Control,0,1,2,3,4)"
+ connect "$port" '>' "PIN(Tone Control,0,1)"
}
-function prologic
+function add_output_simple_2
{
- local name=$1
- local port=$2
+ local port=$1
- if test $DEBUG -gt 1 ; then
- echo "prologic \"$name\" $port"
- fi
+ connect "$port" '>' "PIN(Wave Simple Stereo To 51,0,1)"
+}
-# Stereo to 5.1
- runlo10k1 -n --ctrl "" --patch_name "$name Stereo To 51" -a prologic.emu10k1
-# Input
- connect "PIN($name Stereo To 51,0,1)" '>' "$port"
+function add_output_prologic_2
+{
+ local port=$1
-# PCM Multi
- runlo10k1 -n --ctrl "c-Left,Right:$name Playback Volume,t-$name Playback Volume:1,c-LeftSurr,RightSurr:$name Surround Playback Volume,t-$name Surround Playback Volume:1,c-Center:$name Center Playback Volume,t-$name Center Playback Volume:1,c-LFE:$name LFE Playback Volume,t-LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
-# Input
- connect "POUT($name Stereo To 51)" '=' "PIN($name Multi Volume,0,1,2,3,4)"
+ connect "$port" '>' "PIN(Wave Prologic,0,1)"
+}
-# Output
- connect "POUT($name Multi Volume,0,1,2,3,4)" '>' "PIN(Tone Control,0,1,2,3,4)"
+function add_output_switched_2
+{
+ local port=$1
+
+ add_output_simple_2 "$port"
+ add_output_prologic_2 "$port"
}
-function stereo_to_51
+
+function simple_stereo_to_51
{
local name=$1
- local port=$2
+ local control=$2
+ local port=$3
- if test $DEBUG -gt 0 ; then
- echo "stereo_to_51 \"$name\" $port"
+ log 0 "simple_stereo_to_51 \"$name\" $port"
+
+# Simple Stereo to 5.1
+ runlo10k1 -n --ctrl "c-Left,Right:${control}Front Playback Volume,t-${control}Front Playback Volume:1,s-${control}Front Playback Volume:100#100,c-LeftSurr,RightSurr:${control}Surround Playback Volume,t-${control}Surround Playback Volume:1,c-Center:${control}Center Playback Volume,t-${control}Center Playback Volume:1,c-LFE:${control}LFE Playback Volume,t-${control}LFE Playback Volume:1" --patch_name "$name Simple Stereo To 51" -a sto51.emu10k1
+# Input
+ if [ "$port" != "" ]; then
+ connect "$port" '>' "PIN($name Simple Stereo To 51,0,1)"
fi
+}
+
+function prologic
+{
+ local name=$1
+ local control=$2
+ local port=$3
-# simple_stereo_to_51 "$name" "$port"
- prologic "$name" "$port"
+ log 0 "prologic \"$name\" $port"
+# Stereo to 5.1
+ runlo10k1 -n --ctrl "" --patch_name "$name Prologic" -a prologic.emu10k1
+# Input
+ if [ "$port" != "" ]; then
+ connect "PIN($name Prologic,0,1)" '>' "$port"
+ fi
+
+# PCM Multi
+ runlo10k1 -n --ctrl "c-Left,Right:${control}Front Playback Volume,t-${control}Front Playback Volume:1,c-LeftSurr,RightSurr:${control}Surround Playback Volume,t-${control}Surround Playback Volume:1,c-Center:${control}Center Playback Volume,t-${control}Center Playback Volume:1,c-LFE:${control}LFE Playback Volume,t-${control}LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
+# Input
+ connect "POUT($name Prologic)" '=' "PIN($name Multi Volume,0,1,2,3,4,5)"
}
function tone
local name=$1
local port=$2
- if test $DEBUG -gt 0 ; then
- echo "tone \"$name\" $port"
- fi
+ log 0 "tone \"$name\" $port"
#
# Tone
local name=$1
local port=$2
- if test $DEBUG -gt 0 ; then
- echo "multi_playback \"$name\" $port"
+ if [ "$name" != "" ]; then
+ name="$name "
fi
+ log 0 "multi_playback \"$name\" $port"
+
# PCM Multi
- runlo10k1 -n --ctrl "c-Left,Right:PCM Front Playback Volume,t-PCM Front Playback Volume:1,c-LeftSurr,RightSurr:Surround Playback Volume,t-Surround Playback Volume:1,c-Center:Center Playback Volume,t-Center Playback Volume:1,c-LFE:LFE Playback Volume,t-LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
+ runlo10k1 -n --ctrl "c-Left,Right:${name}Front Playback Volume,t-${name}Front Playback Volume:1,c-LeftSurr,RightSurr:${name}Surround Playback Volume,t-${name}Surround Playback Volume:1,c-Center:${name}Center Playback Volume,t-${name}Center Playback Volume:1,c-LFE:${name}LFE Playback Volume,t-${name}LFE Playback Volume:1" --patch_name "$name Multi Volume" -a simple.emu10k1
# Input
connect "PIN($name Multi Volume)" '>' "$port"
# Output
function fxbus
{
- runlo10k1 --patch_name "FX Bus" -a fxbus.emu10k1
- connect "PIN(FX Bus)" '=' "FX(FX_PCM_Left,FX_PCM_Right,FX_PCM_Surr_Left,FX_PCM_Surr_Right,FX_MIDI_Left,FX_MIDI_Right,FX_Center,FX_LFE,8,9)"
-
- fx_multi="POUT(FX Bus,0,1,2,3,6,7)"
- fx_front="POUT(FX Bus,0,1)"
- fx_rear="POUT(FX Bus,2,3)"
- fx_midi="POUT(FX Bus,4,5)"
- fx_pcm="POUT(FX Bus,8,9)"
+ local name=$1
+ local enable_pcm_fx89=$2
+
+ log 0 "fxbus \"$name\"" $enable_pcm_fx89
+
+ runlo10k1 --patch_name "$name" -a fxbus.emu10k1
+ connect "PIN($name)" '=' "FX(FX_PCM_Left,FX_PCM_Right,FX_PCM_Surr_Left,FX_PCM_Surr_Right,FX_MIDI_Left,FX_MIDI_Right,FX_Center,FX_LFE,8,9)"
+
+
+ if [ $enable_pcm_fx89 ]; then
+ local front="8,9"
+ else
+ local front="0,1"
+ fi
+
+ fx_pcm="POUT($name,0,1)"
+ fx_front="POUT($name,$front)"
+ fx_rear="POUT($name,2,3)"
+ fx_midi="POUT($name,4,5)"
+ fx_multi="POUT($name,$front,2,3,6,7)"
}
#dump_patches 16
+# Clear
runlo10k1 -s
-tone "Tone Control"
+rename "FX(8)" "FX_PCM_Front_Left"
+rename "FX(9)" "FX_PCM_Front_Right"
-fxbus
+tone "Tone Control"
-#copy "FX89" "FX(8,9)"
-stereo_to_51 "Wave" "$fx_pcm"
+fxbus "FX Bus" $FXIN_PCM_89
+
+if [ "$DECODER" = "PROLOGIC" ]; then
+ prologic "Wave"
+ connect "POUT(Wave Multi Volume,0,1,2,3,4,5)" '>' "PIN(Tone Control,0,1,2,3,4,5)"
+ add_output_func=add_output_prologic_2
+elif [ "$DECODER" = "BOTH" ]; then
+ prologic "Wave"
+ simple_stereo_to_51 "Wave"
+ switch_5x2 "Wave Prologic" "POUT(Wave Prologic,0,1,2,3,4)" "POUT(Wave Simple Stereo To 51,0,1,2,3,4)" 0
+ add_output_func=add_output_switched_2
+else
+ simple_stereo_to_51 "Wave"
+#"$fx_pcm"
+ connect "POUT(Wave Simple Stereo To 51,0,1,2,3,4,5)" '>' "PIN(Tone Control,0,1,2,3,4,5)"
+ add_output_func=add_output_simple_2
+fi
#
# FXBUS
#
-multi_playback "PCM" "$fx_multi"
-capture "PCM Front" "$fx_front"
-capture "Wave" "$fx_pcm"
-capture "Surround" "$fx_rear"
+$std_playback "Wave" "$fx_pcm"
+$std_capture "Wave" "$fx_pcm"
-playback "Music" "$fx_midi"
-capture "Music" "$fx_midi"
+multi_playback "PCM" "$fx_multi"
+$std_capture "PCM Front" "$fx_front"
+$std_capture "PCM Surround" "$fx_rear"
+
+$std_playback "Music" "$fx_midi"
+$std_capture "Music" "$fx_midi"
#
# INPUTS
#
-playback "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"
-capture_noswitch "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"
-
-# playback "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"
-# capture "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"
-# playback "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"
-# capture "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"
-
-# playback "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"
-# capture "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"
-
-# playback "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"
-# capture "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"
-
-# playback "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"
-# capture "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"
-
-# playback "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"
-# capture "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"
-
-
-master_volume="Master_2 Playback Volume"
-master_switch="Master_2 Playback Switch"
-
-master "Master_2" "POUT(Tone Control)"
-connect "POUT($master_switch)" '>' "OUT(OUT_AC97_Left,OUT_AC97_Right,OUT_Analog_Surr_Left,OUT_Analog_Surr_Right,OUT_AC97_Center,OUT_AC97_LFE)"
-
-exit
+if [ "$EXTIN_AC97" = "1" ]; then
+ $std_playback "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"
+ capture_noswitch "AC97" "IN(IN_AC97_Left,IN_AC97_Right)"
+fi
+
+if [ "$EXTIN_SPDIF_CD" = "1" ]; then
+ $std_playback "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"
+ $std_capture "IEC958 TTL" "IN(IN_TTL_IEC958_Left,IN_TTL_IEC958_Right)"
+fi
+
+if [ "$EXTIN_ZOOM" = "1" ]; then
+ $std_playback "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"
+ $std_capture "Zoom Video" "IN(IN_Zoom_Video_Left,IN_Zoom_Video_Right)"
+fi
+
+if [ "$EXTIN_TOSLINK" = "1" ]; then
+ $std_playback "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"
+ $std_capture "IEC958 LiveDrive" "IN(IN_Optical_IEC958_Left,IN_Optical_IEC958_Right)"
+fi
+
+if [ "$EXTIN_LINE1" = "1" ]; then
+ $std_playback "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"
+ $std_capture "Line LiveDrive" "IN(IN_Line_Mic_1_Left,IN_Line_Mic_1_Right)"
+fi
+
+if [ "$EXTIN_COAX_SPDIF" = "1" ]; then
+ $std_playback "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"
+ $std_capture "IEC958 Coaxial" "IN(IN_Coax_IEC958_Left,IN_Coax_IEC958_Right)"
+fi
+
+if [ "$EXTIN_LINE2" = "1" ]; then
+ $std_playback "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"
+ $std_capture "Line2 LiveDrive" "IN(IN_Line_Mic_2_Left,IN_Line_Mic_2_Right)"
+fi
+
+master_name="Master Digital"
+master_volume="$master_name Playback Volume"
+master_switch="$master_name Playback Switch"
+
+master "$master_name" "POUT(Tone Control)" 0
+
+if [ "$EXTOUT_ANALOG_FRONT" = "1" ]; then
+ log 0 "out Analog Front"
+ connect "POUT($master_switch,0,1)" '>' "OUT(OUT_AC97_Left,OUT_AC97_Right)"
+fi
+
+if [ "$EXTOUT_REAR" = "1" ]; then
+ log 0 "out SB Live 5.1 (c) 2003 - Rear"
+ connect "POUT($master_switch,2,3)" '>' "OUT(13,14)"
+elif [ "$EXTOUT_ANALOG_REAR" = "1" ]; then
+ log 0 "out Analog Rear"
+ connect "POUT($master_switch,2,3)" '>' "OUT(OUT_Analog_Surr_Left,OUT_Analog_Surr_Right)"
+fi
+
+if [ "$EXTOUT_CENTER" = "1" ]; then
+ log 0 "out Center"
+ connect "POUT($master_switch,4)" '>' "OUT(OUT_Center)"
+elif [ "$EXTOUT_ANALOG_CENTER" = "1" ]; then
+ log 0 "out Analog Center"
+ connect "POUT($master_switch,4)" '>' "OUT(OUT_AC97_Center)"
+fi
+
+if [ "$EXTOUT_LFE" = "1" ]; then
+ log 0 "out LFE"
+ connect "POUT($master_switch,5)" '>' "OUT(OUT_LFE)"
+elif [ "$EXTOUT_ANALOG_LFE" = "1" ]; then
+ log 0 "out Analog LFE"
+ connect "POUT($master_switch,5)" '>' "OUT(OUT_AC97_LFE)"
+fi
+
+# if [ $EXTOUT_MIC_CAP ]; then
+# log 0 "out MIC Capture buffer"
+# connect "" '>' "OUT(OUT_MIC_Capture)"
+# fi
+
+if [ "$EXTOUT_HEADPHONE" = "1" ]; then
# Headphone
+ log 0 "out Headphone"
-# Headphone Switch
-runlo10k1 -n --ctrl "c-switchL:Headphone Center Playback Switch,c-switchR:Headphone LFE Playback Switch,t-Headphone Center Playback Switch:4,t-Headphone LFE Playback Switch:4,i-Headphone Center Playback Switch:1,i-Headphone LFE P\
-layback Switch:1" --patch_name "Headphone Center Playback Switch" -a switch_2.emu10k1
+ runlo10k1 -n --ctrl "c-switchL:Headphone Center Playback Switch,c-switchR:Headphone LFE Playback Switch,t-Headphone Center Playback Switch:4,t-Headphone LFE Playback Switch:4,i-Headphone Center Playback Switch:1,i-Headphone LFE Playback Switch:1" --patch_name "Headphone Playback Switch" -a switch_2x2.emu10k1
#Input
-#connect "POUT(Headphone Playback Volume)" '' "PIN(Headphone Center Playback Switch)"
-#Output
-#connect "POUT(Headphone Center Playback Switch,0,1)" '' "OUT(OUT_Headphone_Left,OUT_Headphone_Right)"
+ connect "PIN(Headphone Playback Switch,0,1)" '>' "POUT(Tone Control,0,1)"
+ connect "PIN(Headphone Playback Switch,2,3)" '>' "POUT(Tone Control,4,5)"
-# Headphone Volume
-runlo10k1 -n --ctrl "c-Left,Right:Headphone Playback Volume,t-Headphone Playback Volume#1:1,i-Headphone Playback Volume:1" --patch_name "Headphone Playback Volume" -a vol_2.emu10k1
-#Input
-#runlo10k1 --conadd "PIN(Headphone Playback Volume,0,1)>PIN(Wave Stereo To 51,0,1)"
-#connect "POUT(Headphone Playback Volume,0,1)" '>' "PIN(Wave Stereo To 51,0,1)"
-#connect "POUT(Tone Control,0,1)" '=' "PIN(Headphone Playback Volume,0,1)"
-#connect "POUT(Headphone Playback SwitchTone Control,0,1)" '=' "PIN(Headphone Playback Volume,0,1)"
+ volume "Headphone Playback" "POUT(Headphone Playback Switch,0,1)" 100#100 1
#Output
-runlo10k1 -n --ctrl "c-enableL,enableR:IEC958 Optical Raw Playback Switch,t-IEC958 Optical Raw Playback Switch:4" --patch_name "Output" -a output.emu10k1
-#Inputs
-runlo10k1 --conadd "POUT(Master Switch)=PIN(Output,0,1,2,3,4,5)"
-#runlo10k1 --conadd "PIN(Output,6,7)=FX(20,21)"
-#Output
-runlo10k1 --conadd "POUT(Output,0,1,2,3,4,5)=OUT(0,1,8,9,17,18)"
-runlo10k1 --conadd "POUT(Output,6,7,8,9,10,11)=OUT(0,1,2,3,4,5)"
+ connect "POUT(Headphone Playback Volume)" '>' "OUT(OUT_Headphone_Left,OUT_Headphone_Right)"
+fi
+
+if [ "$EXTOUT_IEC958" = "1" ]; then
+ log 0 "out IEC958 Optical Raw"
+
+ switch_2x2 "IEC958 Optical Raw Playback" "POUT(Tone Control,0,1)" "POUT(IEC958)" 1#1
+ connect "POUT(IEC958 Optical Raw Playback Switch,0,1)" '>' "OUT(OUT_Opt_IEC958_Left,OUT_Opt_IEC958_Right)"
+# connect "POUT(IEC958 Optical Raw Playback Switch,0,1)" '>' "OUT(OUT_AC97_Left,OUT_AC97_Right)"
+fi
git://git.alsa-project.org / alsa-tools.git / commitdiff