Hans de Goede [Wed, 8 Aug 2018 09:05:37 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes
Fix ADC and Mic capture volumes, so that the microphone inputs actually
work.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Wed, 8 Aug 2018 09:05:36 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence, support SSP0
Use the generic SSP enable sequence from bytcr/PlatformEnableSeq.conf,
for boards using SSP2 this is identical the code it replaces and this
adds support for boards using SSP0.
This fixes sound not working on Bay Trail CR tablets with a rt5651 codec.
This commit also calls the generic disable sequence on shutdown
(this is new).
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Wed, 8 Aug 2018 09:05:35 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching
pulseaudio will run the DisableSequence of the current playback device
before running the EnableSequence of the new playback device.
This causes the Platform Clock and BIAS to temporarily get turned off which
on the rt5651 breaks audio-streams which are playing when switching.
This commit moves the disabling to the EnableSequence of the other device
fixing this.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Wed, 8 Aug 2018 09:05:34 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled
Start with all switches disabled, so that e.g. the
LOUT L/R Playback Switches are not left enabled when starting with
headphones plugged in.
This fixes the platform clock being kept on by these in some cases.
While at also move the IN? Boost and IF1 ASRC Switch lines around
a bit to match the order from https://github.com/plbossart/UCM so
the profiles can be more easily compared.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
That commit also adds line-in support, so it has not been
taken in its entirety.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Wed, 8 Aug 2018 09:05:32 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP
The headphones can either be driven directly from DAC1, or through
the HP volume mixer chain to allow volume control, both can be enabled
at the same time, but this should not be done.
Mix only DAC1 to the headphones and not the HP volume path, there
are 2 reasons to choice the DAC1 path;
1) It is the power-on-reset default
2) We don't expose the volume control to e.g. pulseaudio anyways so it
is not useful
While at it also move the "HPO MIX DAC1" and "HPO MIX HPVOL" entries up a
bit so that they are no longer inbetween the "HPO L Playback Switch" and
"HPO R Playback Switch" entries.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Wed, 8 Aug 2018 09:05:31 +0000 (11:05 +0200)]
conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf
Use the generic Intel SSP bytcr/PlatformEnableSeq.conf file, it is
identical to all the cset statements this commit removes.
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Urja Rannikko [Wed, 6 Jun 2018 17:52:42 +0000 (17:52 +0000)]
conf/ucm: VEYRON-I2S: Add internal speakers and mic, other fixes
Other fixes include output/input names (comments) for UIs (pavucontrol)
to display, and Playback/CapturePCM entries so pulseaudio initializes
correctly on this hardware.
Signed-off-by: Urja Rannikko <urjaman@gmail.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Thu, 31 May 2018 15:10:26 +0000 (17:10 +0200)]
conf/ucm: chtnau8824: Add Cube iWork8 Air and Pipo W2S specific profiles
The Cube iWork8 Air and Pipo W2S tablets both only have a single speaker.
Add long-name profiles for them which are identical to the default
chtnau8824 profile, except that they include the nau8824/MonoSpeaker.conf
snippet instead of the nau8824/Speaker.conf one.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Hans de Goede [Thu, 31 May 2018 15:10:25 +0000 (17:10 +0200)]
conf/ucm: chtnau8824: Add UCM profile for chtnau8824 boards
Add UCM profile for chtnau8824 boards based on:
https://github.com/plbossart/UCM/blob/master/chtnau8824
Split into multiple files in the same way as this was done for the
bytcr-rt5640 support, re-using the existing ucm/PlatformEnableSeq.conf
and ucm/PlatformDisableSeq.conf files for the SST mixer settings.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Add a disable sequence powering off the SST mixer elements, loosely
based on the default DisableSequence from:
https://github.com/plbossart/UCM/blob/master/chtnau8824/HiFi.conf
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
With a recently merged kernel commit, the kernel now sets a long-name for
bytcr-rt5640 boards which indicates if a single (mono) speaker or stereo
speakers are used and wether dmic1, in1 or in3 is used for the internal
mic (the headset mic sofar is always in2).
This commit adds UCM profiles for bytcr-rt5640 boards using these new
long-names, based on the generic bytcr-rt5640 profile.
The added profiles have the unnecessary input / output options from the
generic profile removed leaving only 2 input and 2 output options, which
are automatically switched between by e.g. pulse based on jack-detect.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
This commit adds the generic UCM profile for bytcr-rt5640 boards from:
https://github.com/plbossart/UCM, plus the fixes from this pull-req:
https://github.com/plbossart/UCM/pull/31
The profile has been split up into separate per input / output files to
allow for creation of long-name profiles with the specific input / output
combinations found on a board without needing to copy and paste things.
Note this profile exports all inputs and both stereo/mono speaker setups
even though a typical device will not use all. Ideally a long-name based
device specific profile made up of the various parts should be used
instead.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Takashi Iwai [Wed, 2 May 2018 14:23:21 +0000 (16:23 +0200)]
conf/ucm: Add a UCM profile for Dell WD15 Dock USB-audio
USB-audio device on Dell WD15 docking station provides two individual
PCM streams, one for headphone and another for line out. A UCM
profile gives the proper roles for these.
Hans de Goede [Sat, 28 Apr 2018 19:52:00 +0000 (21:52 +0200)]
conf/ucm: chtrt5645: At config for the Lenovo Ideapad Miix 320
The Lenovo Ideapad Miix 320 uses a digital mic connected to the DMIC2 input
(unlike the Asus T100HA which has it connected to the DMIC1 input), add a
long-name config specific for the Miix 320, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for a digital mic connected to the DMIC2 input.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Hans de Goede [Sat, 28 Apr 2018 19:51:59 +0000 (21:51 +0200)]
conf/ucm: chtrt5645: At config for the Asus T100HA
The Asus T100HA uses a digital mic rather then an analog one, add
long-name config specific for the T100HA, which is a copy of the standard
chtrt5645 config with the internal analog mic section replaced with one
for the digital mic found on the Asus T100HA.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a configuration for Cherry Trail boards which use a rt5645 codec
connected to a mono speaker and with an analog mic on IN2N + IN2P.
The chtrt5645-mono-speaker-analog-mic/HiFi.conf for this is based on the
latest version from https://github.com/plbossart/UCM/tree/master/chtrt5645
with all the unused input options removed and some changes made to make
the analog mic work.
This commit also adds 2 ucm dirs with the longname of 2 boards known to use
this setup, which simply contain a symlink to the generic
chtrt5645-mono-speaker-analog-mic entry.
Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Takashi Iwai [Tue, 5 Dec 2017 14:08:01 +0000 (15:08 +0100)]
conf/ucm: Add Gigabyte mobo UCM profile with dual HD-audio codecs
Like the previous Lenovo laptops, some Gigabyte mobos have dual
HD-audio codecs and need to switch dynamically via UCM profile.
Reuse the same profile as Lenovo dual codecs, so far.
Takashi Iwai [Tue, 5 Dec 2017 13:53:11 +0000 (14:53 +0100)]
conf/ucm: Add dual HD-audio codecs config for Lenovo
Some recent Lenovo laptops have dual codecs and we need to switch them
accordingly. The kernel side already contains a fix and gives the
unique longname string for identifying the board, and here we hook up
the corresponding UCM profile.
The profile was corrected and tested by Hui Wang on Lenovo p520.
Carlo Caione [Wed, 8 Nov 2017 12:33:30 +0000 (12:33 +0000)]
conf/ucm: rt5651: Mute speakers on boot
The UCM configuration is enabling the speakers in the SectionDefaults.
This is a problem when booting with an headset already connected since
the audio output is routed at the same time both on speakers and
heaphones until the jack is disconnected and reconnected again.
Fix this disabling all the outputs in the default mixer configuration.
Signed-off-by: Carlo Caione <carlo@endlessm.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
DB410c board has support for both Digital and Analog audio. Digital
audio is over HDMI and analog is over codec chip integrated inside the
APQ8016 SOC.
It can support:
- 3 Microphones: Primary Mic(Handset mic), Headset Mic and Secondary
- 2 Digital Microphones.
- Earpiece.
- Headset.
- Loud Speaker.
- HDMI.
[Riku: squashed Srinivas's patches together and converted spaces to tabs]
Heiko Stübner [Wed, 8 Jun 2016 23:17:15 +0000 (01:17 +0200)]
conf/ucm: ROCKCHIP-I2S: rename to VEYRON-I2S
Commit a192f52fc63a introduced an ucm profile for Rockchip Veyron-
Chromebooks by taking the ucm profile from the ChromeOS userspace.
But similarly to DAISY-I2S, PAZ00 and most other profiles, the audio
setup is pretty specific to a board type, so hogging the Rockchip name
will make it harder for future Rockchip based boards to fit in nicely.
And while Veyron also is a family of boards, all of them share the
same audio setup. The ucm profile was not released with any official
alsa release and the audio setup also isn't in the mainline kernel yet,
so such a rename should be easily possible.
Tomeu Vizoso [Thu, 15 Jan 2015 16:27:29 +0000 (17:27 +0100)]
conf/ucm: GoogleNyan: Add configuration
Taken from the ChromeOS sources, this configuration should apply to all
Nyan boards from Google, so far HP Chromebook 14 (nyan-blaze) and Acer
Chromebook 13 (nyan-big).
git://git.alsa-project.org / alsa-ucm-conf.git / log