From 3375a08a4c20cb8f3ff5587bd5100cbcfcb95348 Mon Sep 17 00:00:00 2001 From: Jaroslav Kysela Date: Mon, 23 Jan 2012 11:40:34 +0100 Subject: [PATCH] More build fixes (gtk1 check removal from echomixer), cvscompile removal Signed-off-by: Jaroslav Kysela --- .gitignore | 15 +- ac3dec/cvscompile | 9 -- as10k1/cvscompile | 25 --- echomixer/configure.in | 18 --- echomixer/configure.in-gtk2 | 9 -- echomixer/cvscompile | 25 --- hdspconf/cvscompile | 25 --- hdsploader/cvscompile | 11 -- hdspmixer/cvscompile | 25 --- ld10k1/INSTALL | 255 +++++++++++++++++++++++-------- ld10k1/configure.in | 1 + ld10k1/cvscompile | 9 -- mixartloader/cvscompile | 11 -- pcxhrloader/cvscompile | 11 -- qlo10k1/INSTALL | 255 +++++++++++++++++++++++-------- qlo10k1/config.h.in | 24 ++- qlo10k1/configure.in | 1 + qlo10k1/cvscompile | 9 -- rmedigicontrol/configure.in | 18 --- rmedigicontrol/configure.in-gtk2 | 8 - rmedigicontrol/cvscompile | 25 --- sb16_csp/cvscompile | 25 --- seq/cvscompile | 3 - seq/sbiload/cvscompile | 25 --- sscape_ctl/cvscompile | 24 --- us428control/cvscompile | 11 -- usx2yloader/cvscompile | 11 -- vxloader/cvscompile | 11 -- 28 files changed, 420 insertions(+), 479 deletions(-) delete mode 100755 ac3dec/cvscompile delete mode 100755 as10k1/cvscompile delete mode 100644 echomixer/configure.in-gtk2 delete mode 100755 echomixer/cvscompile delete mode 100755 hdspconf/cvscompile delete mode 100755 hdsploader/cvscompile delete mode 100755 hdspmixer/cvscompile delete mode 100755 ld10k1/cvscompile delete mode 100755 mixartloader/cvscompile delete mode 100755 pcxhrloader/cvscompile delete mode 100755 qlo10k1/cvscompile delete mode 100644 rmedigicontrol/configure.in-gtk2 delete mode 100755 rmedigicontrol/cvscompile delete mode 100755 sb16_csp/cvscompile delete mode 100755 seq/cvscompile delete mode 100755 seq/sbiload/cvscompile delete mode 100755 sscape_ctl/cvscompile delete mode 100755 us428control/cvscompile delete mode 100755 usx2yloader/cvscompile delete mode 100755 vxloader/cvscompile diff --git a/.gitignore b/.gitignore index cdaa897..36308dc 100644 --- a/.gitignore +++ b/.gitignore @@ -47,10 +47,16 @@ echomixer/Makefile echomixer/configure envy24control/Makefile envy24control/configure -hdspconf/src/hdspconf +hdspconf/Makefile hdspconf/configure -hdspmixer/src/hdspmixer +hdspconf/src/hdspconf +hdspconf/src/Makefile +hdspconf/pixmaps/Makefile +hdspmixer/Makefile hdspmixer/configure +hdspmixer/src/hdspmixer +hdspmixer/pixmaps/Makefile +hdspmixer/src/Makefile hdsploader/Makefile hdsploader/configure hwmixvolume/Makefile @@ -59,12 +65,14 @@ ld10k1/Makefile ld10k1/compile ld10k1/ld10k1d ld10k1/configure +ld10k1/m4/ ld10k1/contrib/Makefile ld10k1/contrib/emu10k1MIDIEffects/Makefile ld10k1/doc/Makefile ld10k1/dump/Makefile ld10k1/include/Makefile ld10k1/include/lo10k1 +ld10k1/include/stamp-vh ld10k1/setup/init_audigy ld10k1/setup/init_audigy_eq10 ld10k1/setup/init_live @@ -80,13 +88,16 @@ mixartloader/Makefile mixartloader/configure pcxhrloader/Makefile pcxhrloader/configure +qlo10k1/Makefile qlo10k1/configure qlo10k1/include qlo10k1/ld10k1 +qlo10k1/src/Makefile qlo10k1/src/*.moc.cpp qlo10k1/src/qlo10k1 qlo10k1/src/dlgs/*.cpp qlo10k1/src/dlgs/*.h +qlo10k1/m4/ rmedigicontrol/Makefile rmedigicontrol/configure *control/*control diff --git a/ac3dec/cvscompile b/ac3dec/cvscompile deleted file mode 100755 index 6c3452b..0000000 --- a/ac3dec/cvscompile +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/sh - -aclocal $ACLOCAL_FLAGS -autoheader -automake --add-missing --copy --foreign -touch depcomp -autoconf -./configure $* -make diff --git a/as10k1/cvscompile b/as10k1/cvscompile deleted file mode 100755 index e8a1c45..0000000 --- a/as10k1/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/echomixer/configure.in b/echomixer/configure.in index 2aca4ef..9228924 100644 --- a/echomixer/configure.in +++ b/echomixer/configure.in @@ -1,27 +1,9 @@ -dnl Process this file with autoconf to produce a configure script. AC_INIT(echomixer.c) AM_INIT_AUTOMAKE(echomixer, 1.0.5) AC_PROG_CC AC_PROG_INSTALL AC_HEADER_STDC -AC_ARG_WITH(gtk2, - [ --with-gtk2=yes,no Build with GTK+2 (default = yes)], - with_gtk2="$withval", with_gtk2="yes") - -if test "$with_gtk2" = "yes"; then - PKG_CHECK_MODULES(ECHOMIXER, gtk+-2.0 alsa >= 1.0.0) -else - -AM_PATH_GTK(1.2.0) -AM_PATH_ALSA(1.0.0) -ECHOMIXER_CFLAGS="$CFLAGS $ALSA_CFLAGS $GTK_CFLAGS" -ECHOMIXER_LIBS="$LIBS $ALSA_LIBS $GTK_LIBS" -AC_SUBST(ECHOMIXER_CFLAGS) -AC_SUBST(ECHOMIXER_LIBS) - -fi - AC_OUTPUT(Makefile) diff --git a/echomixer/configure.in-gtk2 b/echomixer/configure.in-gtk2 deleted file mode 100644 index 9228924..0000000 --- a/echomixer/configure.in-gtk2 +++ /dev/null @@ -1,9 +0,0 @@ -AC_INIT(echomixer.c) -AM_INIT_AUTOMAKE(echomixer, 1.0.5) -AC_PROG_CC -AC_PROG_INSTALL -AC_HEADER_STDC - -PKG_CHECK_MODULES(ECHOMIXER, gtk+-2.0 alsa >= 1.0.0) - -AC_OUTPUT(Makefile) diff --git a/echomixer/cvscompile b/echomixer/cvscompile deleted file mode 100755 index 3a5537d..0000000 --- a/echomixer/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/hdspconf/cvscompile b/hdspconf/cvscompile deleted file mode 100755 index e8a1c45..0000000 --- a/hdspconf/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/hdsploader/cvscompile b/hdsploader/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/hdsploader/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/hdspmixer/cvscompile b/hdspmixer/cvscompile deleted file mode 100755 index 3a5537d..0000000 --- a/hdspmixer/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/ld10k1/INSTALL b/ld10k1/INSTALL index 56b077d..7d1c323 100644 --- a/ld10k1/INSTALL +++ b/ld10k1/INSTALL @@ -1,16 +1,25 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -These are generic installation instructions. + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -23,9 +32,9 @@ debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is +the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale -cache files.) +cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail @@ -35,30 +44,37 @@ some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. + `./configure' to configure the package for your system. - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,65 +83,120 @@ The simplest way to compile this package is: all sorts of other programs in order to regenerate files that came with the distribution. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the +own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. Installation Names ================== -By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PREFIX'. + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PREFIX', the package will -use PREFIX as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,14 +208,53 @@ find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -152,14 +262,15 @@ type, such as `sun4', or a canonical name which has the form: where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will +use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a @@ -170,9 +281,9 @@ eventually be run) with `--host=TYPE'. Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -181,7 +292,7 @@ A warning: not all `configure' scripts look for a site script. Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -190,21 +301,29 @@ them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: +overridden in the site shell script). - /bin/bash ./configure CONFIG_SHELL=/bin/bash +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -231,6 +350,16 @@ configuration-related scripts to be executed by `/bin/bash'. Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diff --git a/ld10k1/configure.in b/ld10k1/configure.in index f1fc8d0..b04fa34 100644 --- a/ld10k1/configure.in +++ b/ld10k1/configure.in @@ -1,5 +1,6 @@ AC_INIT(src/ld10k1.c) AM_INIT_AUTOMAKE(ld10k1, 0.1.8p1) +AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS(config.h) AC_PROG_CC diff --git a/ld10k1/cvscompile b/ld10k1/cvscompile deleted file mode 100755 index 5ddd1ec..0000000 --- a/ld10k1/cvscompile +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/bash - -autoreconf -fi -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/mixartloader/cvscompile b/mixartloader/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/mixartloader/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/pcxhrloader/cvscompile b/pcxhrloader/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/pcxhrloader/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/qlo10k1/INSTALL b/qlo10k1/INSTALL index 56b077d..7d1c323 100644 --- a/qlo10k1/INSTALL +++ b/qlo10k1/INSTALL @@ -1,16 +1,25 @@ Installation Instructions ************************* -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free -Software Foundation, Inc. +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005, +2006, 2007, 2008, 2009 Free Software Foundation, Inc. -This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. + Copying and distribution of this file, with or without modification, +are permitted in any medium without royalty provided the copyright +notice and this notice are preserved. This file is offered as-is, +without warranty of any kind. Basic Installation ================== -These are generic installation instructions. + Briefly, the shell commands `./configure; make; make install' should +configure, build, and install this package. The following +more-detailed instructions are generic; see the `README' file for +instructions specific to this package. Some packages provide this +`INSTALL' file but do not implement all of the features documented +below. The lack of an optional feature in a given package is not +necessarily a bug. More recommendations for GNU packages can be found +in *note Makefile Conventions: (standards)Makefile Conventions. The `configure' shell script attempts to guess correct values for various system-dependent variables used during compilation. It uses @@ -23,9 +32,9 @@ debugging `configure'). It can also use an optional file (typically called `config.cache' and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is +the results of its tests to speed up reconfiguring. Caching is disabled by default to prevent problems with accidental use of stale -cache files.) +cache files. If you need to do unusual things to compile the package, please try to figure out how `configure' could check whether to do them, and mail @@ -35,30 +44,37 @@ some point `config.cache' contains results you don't want to keep, you may remove or edit it. The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. +`configure' by a program called `autoconf'. You need `configure.ac' if +you want to change it or regenerate `configure' using a newer version +of `autoconf'. -The simplest way to compile this package is: + The simplest way to compile this package is: 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. + `./configure' to configure the package for your system. - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. + Running `configure' might take a while. While running, it prints + some messages telling which features it is checking for. 2. Type `make' to compile the package. 3. Optionally, type `make check' to run any self-tests that come with - the package. + the package, generally using the just-built uninstalled binaries. 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the + documentation. When installing into a prefix owned by root, it is + recommended that the package be configured and built as a regular + user, and only the `make install' phase executed with root + privileges. + + 5. Optionally, type `make installcheck' to repeat any self-tests, but + this time using the binaries in their final installed location. + This target does not install anything. Running this target as a + regular user, particularly if the prior `make install' required + root privileges, verifies that the installation completed + correctly. + + 6. You can remove the program binaries and object files from the source code directory by typing `make clean'. To also remove the files that `configure' created (so you can compile the package for a different kind of computer), type `make distclean'. There is @@ -67,65 +83,120 @@ The simplest way to compile this package is: all sorts of other programs in order to regenerate files that came with the distribution. + 7. Often, you can also type `make uninstall' to remove the installed + files again. In practice, not all packages have tested that + uninstallation works correctly, even though it is required by the + GNU Coding Standards. + + 8. Some packages, particularly those that use Automake, provide `make + distcheck', which can by used by developers to test that all other + targets like `make install' and `make uninstall' work correctly. + This target is generally not run by end users. + Compilers and Options ===================== -Some systems require unusual options for compilation or linking that the -`configure' script does not know about. Run `./configure --help' for -details on some of the pertinent environment variables. + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. You can give `configure' initial values for configuration parameters by setting variables in the command line or in the environment. Here is an example: - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + ./configure CC=c99 CFLAGS=-g LIBS=-lposix *Note Defining Variables::, for more details. Compiling For Multiple Architectures ==================================== -You can compile the package for more than one kind of computer at the + You can compile the package for more than one kind of computer at the same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the +own directory. To do this, you can use GNU `make'. `cd' to the directory where you want the object files and executables to go and run the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. +source code in the directory that `configure' is in and in `..'. This +is known as a "VPATH" build. + + With a non-GNU `make', it is safer to compile the package for one +architecture at a time in the source code directory. After you have +installed the package for one architecture, use `make distclean' before +reconfiguring for another architecture. - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. + On MacOS X 10.5 and later systems, you can create libraries and +executables that work on multiple system types--known as "fat" or +"universal" binaries--by specifying multiple `-arch' options to the +compiler but only a single `-arch' option to the preprocessor. Like +this: + + ./configure CC="gcc -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CXX="g++ -arch i386 -arch x86_64 -arch ppc -arch ppc64" \ + CPP="gcc -E" CXXCPP="g++ -E" + + This is not guaranteed to produce working output in all cases, you +may have to build one architecture at a time and combine the results +using the `lipo' tool if you have problems. Installation Names ================== -By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PREFIX'. + By default, `make install' installs the package's commands under +`/usr/local/bin', include files under `/usr/local/include', etc. You +can specify an installation prefix other than `/usr/local' by giving +`configure' the option `--prefix=PREFIX', where PREFIX must be an +absolute file name. You can specify separate installation prefixes for architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PREFIX', the package will -use PREFIX as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. +pass the option `--exec-prefix=PREFIX' to `configure', the package uses +PREFIX as the prefix for installing programs and libraries. +Documentation and other data files still use the regular prefix. In addition, if you use an unusual directory layout you can give options like `--bindir=DIR' to specify different values for particular kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. +you can set and what kinds of files go in them. In general, the +default for these options is expressed in terms of `${prefix}', so that +specifying just `--prefix' will affect all of the other directory +specifications that were not explicitly provided. + + The most portable way to affect installation locations is to pass the +correct locations to `configure'; however, many packages provide one or +both of the following shortcuts of passing variable assignments to the +`make install' command line to change installation locations without +having to reconfigure or recompile. + + The first method involves providing an override variable for each +affected directory. For example, `make install +prefix=/alternate/directory' will choose an alternate location for all +directory configuration variables that were expressed in terms of +`${prefix}'. Any directories that were specified during `configure', +but not in terms of `${prefix}', must each be overridden at install +time for the entire installation to be relocated. The approach of +makefile variable overrides for each directory variable is required by +the GNU Coding Standards, and ideally causes no recompilation. +However, some platforms have known limitations with the semantics of +shared libraries that end up requiring recompilation when using this +method, particularly noticeable in packages that use GNU Libtool. + + The second method involves providing the `DESTDIR' variable. For +example, `make install DESTDIR=/alternate/directory' will prepend +`/alternate/directory' before all installation names. The approach of +`DESTDIR' overrides is not required by the GNU Coding Standards, and +does not work on platforms that have drive letters. On the other hand, +it does better at avoiding recompilation issues, and works well even +when some directory options were not specified in terms of `${prefix}' +at `configure' time. + +Optional Features +================= If the package supports it, you can cause programs to be installed with an extra prefix or suffix on their names by giving `configure' the option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. -Optional Features -================= - -Some packages pay attention to `--enable-FEATURE' options to + Some packages pay attention to `--enable-FEATURE' options to `configure', where FEATURE indicates an optional part of the package. They may also pay attention to `--with-PACKAGE' options, where PACKAGE is something like `gnu-as' or `x' (for the X Window System). The @@ -137,14 +208,53 @@ find the X include and library files automatically, but if it doesn't, you can use the `configure' options `--x-includes=DIR' and `--x-libraries=DIR' to specify their locations. + Some packages offer the ability to configure how verbose the +execution of `make' will be. For these packages, running `./configure +--enable-silent-rules' sets the default to minimal output, which can be +overridden with `make V=1'; while running `./configure +--disable-silent-rules' sets the default to verbose, which can be +overridden with `make V=0'. + +Particular systems +================== + + On HP-UX, the default C compiler is not ANSI C compatible. If GNU +CC is not installed, it is recommended to use the following options in +order to use an ANSI C compiler: + + ./configure CC="cc -Ae -D_XOPEN_SOURCE=500" + +and if that doesn't work, install pre-built binaries of GCC for HP-UX. + + On OSF/1 a.k.a. Tru64, some versions of the default C compiler cannot +parse its `' header file. The option `-nodtk' can be used as +a workaround. If GNU CC is not installed, it is therefore recommended +to try + + ./configure CC="cc" + +and if that doesn't work, try + + ./configure CC="cc -nodtk" + + On Solaris, don't put `/usr/ucb' early in your `PATH'. This +directory contains several dysfunctional programs; working variants of +these programs are available in `/usr/bin'. So, if you need `/usr/ucb' +in your `PATH', put it _after_ `/usr/bin'. + + On Haiku, software installed for all users goes in `/boot/common', +not `/usr/local'. It is recommended to use the following options: + + ./configure --prefix=/boot/common + Specifying the System Type ========================== -There may be some features `configure' cannot figure out automatically, -but needs to determine by the type of machine the package will run on. -Usually, assuming the package is built to be run on the _same_ -architectures, `configure' can figure that out, but if it prints a -message saying it cannot guess the machine type, give it the + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the `--build=TYPE' option. TYPE can either be a short name for the system type, such as `sun4', or a canonical name which has the form: @@ -152,14 +262,15 @@ type, such as `sun4', or a canonical name which has the form: where SYSTEM can have one of these forms: - OS KERNEL-OS + OS + KERNEL-OS See the file `config.sub' for the possible values of each field. If `config.sub' isn't included in this package, then this package doesn't need to know the machine type. If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will +use the option `--target=TYPE' to select the type of system they will produce code for. If you want to _use_ a cross compiler, that generates code for a @@ -170,9 +281,9 @@ eventually be run) with `--host=TYPE'. Sharing Defaults ================ -If you want to set default values for `configure' scripts to share, you -can create a site shell script called `config.site' that gives default -values for variables like `CC', `cache_file', and `prefix'. + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. `configure' looks for `PREFIX/share/config.site' if it exists, then `PREFIX/etc/config.site' if it exists. Or, you can set the `CONFIG_SITE' environment variable to the location of the site script. @@ -181,7 +292,7 @@ A warning: not all `configure' scripts look for a site script. Defining Variables ================== -Variables not defined in a site shell script can be set in the + Variables not defined in a site shell script can be set in the environment passed to `configure'. However, some packages may run configure again during the build, and the customized values of these variables may be lost. In order to avoid this problem, you should set @@ -190,21 +301,29 @@ them in the `configure' command line, using `VAR=value'. For example: ./configure CC=/usr/local2/bin/gcc causes the specified `gcc' to be used as the C compiler (unless it is -overridden in the site shell script). Here is a another example: +overridden in the site shell script). - /bin/bash ./configure CONFIG_SHELL=/bin/bash +Unfortunately, this technique does not work for `CONFIG_SHELL' due to +an Autoconf bug. Until the bug is fixed you can use this workaround: -Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent -configuration-related scripts to be executed by `/bin/bash'. + CONFIG_SHELL=/bin/bash /bin/bash ./configure CONFIG_SHELL=/bin/bash `configure' Invocation ====================== -`configure' recognizes the following options to control how it operates. + `configure' recognizes the following options to control how it +operates. `--help' `-h' - Print a summary of the options to `configure', and exit. + Print a summary of all of the options to `configure', and exit. + +`--help=short' +`--help=recursive' + Print a summary of the options unique to this package's + `configure', and exit. The `short' variant lists options used + only in the top level, while the `recursive' variant lists options + also present in any nested packages. `--version' `-V' @@ -231,6 +350,16 @@ configuration-related scripts to be executed by `/bin/bash'. Look for the package's source code in directory DIR. Usually `configure' can determine that directory automatically. +`--prefix=DIR' + Use DIR as the installation prefix. *note Installation Names:: + for more details, including other options available for fine-tuning + the installation locations. + +`--no-create' +`-n' + Run the configure checks, but stop before creating any output + files. + `configure' also accepts some other, not widely useful, options. Run `configure --help' for more details. diff --git a/qlo10k1/config.h.in b/qlo10k1/config.h.in index 215c9bd..f0b12a9 100644 --- a/qlo10k1/config.h.in +++ b/qlo10k1/config.h.in @@ -1,5 +1,8 @@ /* config.h.in. Generated from configure.in by autoheader. */ +/* Define if building universal (internal helper macro) */ +#undef AC_APPLE_UNIVERSAL_BUILD + /* Define to 1 if you have the header file. */ #undef HAVE_DLFCN_H @@ -33,6 +36,10 @@ /* Define to 1 if you have the header file. */ #undef HAVE_UNISTD_H +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + /* Name of package */ #undef PACKAGE @@ -48,6 +55,9 @@ /* Define to the one symbol short name of this package. */ #undef PACKAGE_TARNAME +/* Define to the home page for this package. */ +#undef PACKAGE_URL + /* Define to the version of this package. */ #undef PACKAGE_VERSION @@ -60,6 +70,14 @@ /* Defined if on Win32 platform */ #undef WIN32 -/* Define to 1 if your processor stores words with the most significant byte - first (like Motorola and SPARC, unlike Intel and VAX). */ -#undef WORDS_BIGENDIAN +/* Define WORDS_BIGENDIAN to 1 if your processor stores words with the most + significant byte first (like Motorola and SPARC, unlike Intel). */ +#if defined AC_APPLE_UNIVERSAL_BUILD +# if defined __BIG_ENDIAN__ +# define WORDS_BIGENDIAN 1 +# endif +#else +# ifndef WORDS_BIGENDIAN +# undef WORDS_BIGENDIAN +# endif +#endif diff --git a/qlo10k1/configure.in b/qlo10k1/configure.in index 86c32a0..da6ea97 100644 --- a/qlo10k1/configure.in +++ b/qlo10k1/configure.in @@ -1,5 +1,6 @@ AC_INIT(src/main.cpp) AM_INIT_AUTOMAKE(qlo10k1, 0.1.2p1) +AC_CONFIG_MACRO_DIR([m4]) AC_CONFIG_HEADERS(config.h) AC_PROG_CXX AC_PROG_LD diff --git a/qlo10k1/cvscompile b/qlo10k1/cvscompile deleted file mode 100755 index 5ddd1ec..0000000 --- a/qlo10k1/cvscompile +++ /dev/null @@ -1,9 +0,0 @@ -#!/bin/bash - -autoreconf -fi -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/rmedigicontrol/configure.in b/rmedigicontrol/configure.in index 1bb1986..bc4c605 100644 --- a/rmedigicontrol/configure.in +++ b/rmedigicontrol/configure.in @@ -3,24 +3,6 @@ AM_INIT_AUTOMAKE(rmedigicontrol, 0.3.5a) AC_PROG_CC AC_PROG_INSTALL AC_HEADER_STDC - -AC_ARG_WITH(gtk2, - [ --with-gtk2=yes,no Build with GTK+2 (default = yes)], - with_gtk2="$withval", with_gtk2="yes") - -if test "$with_gtk2" = "yes"; then - PKG_CHECK_MODULES(RMEDIGICONTROL, gtk+-2.0 alsa >= 1.0.0) -else - -AM_PATH_GTK(1.0.1) -AM_PATH_ALSA(1.0.0) -RMEDIGICONTROL_CFLAGS="$CFLAGS $ALSA_CFLAGS $GTK_CFLAGS" -RMEDIGICONTROL_LIBS="$LIBS $ALSA_LIBS $GTK_LIBS" -AC_SUBST(RMEDIGICONTROL_CFLAGS) -AC_SUBST(RMEDIGICONTROL_LIBS) - -fi - AC_OUTPUT(Makefile) diff --git a/rmedigicontrol/configure.in-gtk2 b/rmedigicontrol/configure.in-gtk2 deleted file mode 100644 index bc4c605..0000000 --- a/rmedigicontrol/configure.in-gtk2 +++ /dev/null @@ -1,8 +0,0 @@ -AC_INIT(rmedigicontrol.c) -AM_INIT_AUTOMAKE(rmedigicontrol, 0.3.5a) -AC_PROG_CC -AC_PROG_INSTALL -AC_HEADER_STDC -PKG_CHECK_MODULES(RMEDIGICONTROL, gtk+-2.0 alsa >= 1.0.0) - -AC_OUTPUT(Makefile) diff --git a/rmedigicontrol/cvscompile b/rmedigicontrol/cvscompile deleted file mode 100755 index e8a1c45..0000000 --- a/rmedigicontrol/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/sb16_csp/cvscompile b/sb16_csp/cvscompile deleted file mode 100755 index e8a1c45..0000000 --- a/sb16_csp/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/seq/cvscompile b/seq/cvscompile deleted file mode 100755 index 57bb7dc..0000000 --- a/seq/cvscompile +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -make CVSCOMPILE_ARGS="$*" diff --git a/seq/sbiload/cvscompile b/seq/sbiload/cvscompile deleted file mode 100755 index e8a1c45..0000000 --- a/seq/sbiload/cvscompile +++ /dev/null @@ -1,25 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing --copy -touch depcomp -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/sscape_ctl/cvscompile b/sscape_ctl/cvscompile deleted file mode 100755 index 01e8151..0000000 --- a/sscape_ctl/cvscompile +++ /dev/null @@ -1,24 +0,0 @@ -#!/bin/bash - -if test "x$AUTOMAKE_DIR" = "x"; then - if test -d /usr/local/share/automake; then - AUTOMAKE_DIR=/usr/local/share/automake - fi - if test -d /usr/share/automake; then - AUTOMAKE_DIR="/usr/share/automake" - fi -fi - -for f in install-sh mkinstalldirs missing; do - cp -av $AUTOMAKE_DIR/$f . -done - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/us428control/cvscompile b/us428control/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/us428control/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/usx2yloader/cvscompile b/usx2yloader/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/usx2yloader/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make diff --git a/vxloader/cvscompile b/vxloader/cvscompile deleted file mode 100755 index 5daa701..0000000 --- a/vxloader/cvscompile +++ /dev/null @@ -1,11 +0,0 @@ -#!/bin/bash - -aclocal $ACLOCAL_FLAGS -automake --foreign --add-missing -autoconf -export CFLAGS='-O2 -Wall -pipe -g' -echo "CFLAGS=$CFLAGS" -echo "./configure $@" -./configure $@ -unset CFLAGS -make -- 2.47.1