From 9f941cb1d7b7afce24922857017e89c4c76659a9 Mon Sep 17 00:00:00 2001 From: Carlo Caione Date: Wed, 8 Nov 2017 12:33:30 +0000 Subject: [PATCH] conf/ucm: rt5651: Mute speakers on boot The UCM configuration is enabling the speakers in the SectionDefaults. This is a problem when booting with an headset already connected since the audio output is routed at the same time both on speakers and heaphones until the jack is disconnected and reconnected again. Fix this disabling all the outputs in the default mixer configuration. Signed-off-by: Carlo Caione Signed-off-by: Takashi Iwai --- src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf index 60798ce7..069427b7 100644 --- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf +++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf @@ -99,11 +99,11 @@ SectionDefaults [ # default state cset "name='ADC Capture Volume' 126" - cset "name='HP Playback Volume' 29" - cset "name='HPO L Playback Switch' on" + cset "name='HP Playback Volume' 0" + cset "name='HPO L Playback Switch' off" cset "name='HPO MIX DAC1 Switch' on" cset "name='HPO MIX HPVOL Switch' on" - cset "name='HPO R Playback Switch' on" + cset "name='HPO R Playback Switch' off" cset "name='HPOVOL L Switch' on" cset "name='HPOVOL R Switch' on" cset "name='IF1 ASRC Switch' on" @@ -123,6 +123,8 @@ SectionDefaults [ cset "name='Stereo2 ADC MIXL ADC2 Switch' on" cset "name='Stereo2 ADC MIXR ADC1 Switch' on" cset "name='Stereo2 ADC MIXR ADC2 Switch' on" + cset "name='Headphone Switch' off" + cset "name='Speaker Switch' off" # input cset "name='Stereo1 ADC L1 Mux' ADC" -- 2.47.1